Installation And Planning Notes; Installation Requirements; Storage; Operating Conditions - Miele PRI 210 Operating Instructions Manual

Installation and planning notes

22

Installation requirements

The flatwork ironer may only be commissioned by Miele
Professional Service or by a Miele authorised technician.

The flatwork ironer must be installed in accordance with applicable
regulations and standards. Local energy supplier regulations must
also be observed.

This flatwork ironer must only be operated in a room that has
sufficient ventilation and is frost-free.

Storage

The following conditions must be observed for transport and storage
of this machine:
- Ambient temperature: -25 °C to +55 °C
- Humidity: 5 % to 75 %, non-condensing
- Maximum storage period: 2 years

Operating conditions

- Ambient temperature: +5 °C to +40 °C
- Humidity: 10% to 85%
- At +21 °C ambient temperature, the maximum permissible relative
humidity is 70%.
 This flatwork ironer should not be operated in the same room as
dry-cleaning equipment using perchloroethylene or solvents
containing CFCs.
Collector motor sparking may convert solvent vapours into
hydrochloric acid which can lead to consequential damage.
Ensure adequate ventilation is present in the room in which the
ironer is installed whilst it is being used.