Surround Text With A Frame - Canon MK5000 User Manual

Surround Text with a Frame

This allows you to surround text with a frame. The following frame shapes are available, with the
default value set to "None. "
Pump Room Pump Room
[Example] Enclosing text in a
1
Display the page where you want to change the frame settings.
2
Press the [Frame] key.
3
Use the arrow keys ([
frames.
4
Press the [Enter] key.
The display returns to the character input
display.
The frame shapes setting can be checked on the
display.
NOTE
• The frame can be set for each page.
• When the cut length is specifi ed, the frame may not be set.
• Depending on the settings of the number of lines, character size, cut length, etc. and the size of the
print media, the frame may not be printed correctly.
• No error message will be displayed even if the print data extends beyond the width (top and bottom)
of the print media. Refer to
character size and frame settings.
Pump Room Pump Room
frame.
], [ ], [ ], [
"Maximum Printable Character Size (P.43)"
44
Pump Room
]) to select from the list of
Frame
for information on
None