Table of Contents
Advertisement
Fine-tuning of the Print Start Position ( Top Adjust)
■
[Example] When printing on a tube in the "Centered" position, the text is shifted to the left,
so move the print start position 2.0 mm to the right.
ABCD
ABCD
Move the print start position
2.0 mm to the right.
1
Press the [Adjust] key.
2
Use [
] or [
3
Use [
] or [
4
Use [
] to display "R 2.0 mm" and press the [Enter] key.
Input the adjust value by [ ] (left direction) or [
] (right direction).
You can adjust the range from Left 2.5 mm to
Right 2.5 mm in 0.1 mm steps.
5
Press the [Shift]+[Canc] keys.
The display returns to the character input display.
IMPORTANT
• Top adjust is not available for plates.
] to select "Top position" and press the [Enter] key.
] to select "Tube, " and press the [Enter] key.
Top adjust
Tube
ShrinkTube
Label
T o p po s i ti o n a d ju st
86
To p p o sit io n
VerticalPosition
Le n gt h
Normal
Normal
Normal
A
Right 2. 0
Advertisement
Table of Contents
