Table of Contents
Advertisement
6
After removing the print media (or cassette), press any key.
After pressing a key, instructions will be
displayed on the screen.
7
Remove any slack in the ribbon.
IMPORTANT
• If the ribbon is loose, it may not operate properly.
8
Replace the ribbon cassette and close the cover.
Insert the ribbon cassette straight in, and
press fi rmly until it clicks into place.
When the cover is closed, a confi rmation
screen will be displayed.
9
When the print media has been removed, use [
press the [Enter] key.
The display returns to the character input
display.
If you select "No", a "Feed Error" message will
be displayed again. Follow the procedure
from step 1 to completely remove the print
media.
Set the ribbon
cassette and close
the cover.
] or [
208
] to select "Yes" and
Yes
No
Advertisement
Table of Contents
