In-situ Aqua TROLL 600 Operator's Manual page 59

1. From the Tools menu in Win-Situ 5 Software, select Win-Situ BaroMerge.
2. Select the "Use a BaroTROLL file:" option.
3. Click the browse button to the right of the file field.
4. Select a BaroTROLL file and click the check mark.
5. Values from the BaroTROLL file will be displayed in the next window. You can edit these values if
necessary.
6. Click the right arrow button.
7. Select the log file(s) you intend to correct and click the check mark.
8. Compensated data files can be viewed or exported from the Data tab.
BaroMerge Output
Your original log file is not changed. A new, corrected log file with the same name and path is created. The
original ".wsl" extension is replaced by "-Baro Merge.wsl".
Post Level Correction within Baro Merge
It is also possible to post correct a level reference in data collected from an absolute sensor if the data has
been compensated through Baro Merge Software.
1. Follow the steps to compensate the absolute data for barometric pressure.
2. When you reach this screen in the Wizard, you can select the check box to Post correct files for level.
1-970-498-1500 65 www.in-situ.com