Table of Contents
Advertisement
6.9 CENTERING BAND
Designed to insure proper centering of the vent inside an
existing masonry chimney. Should be used every 13 feet
(4m).
6.10 SUPPORTING TEES AND ELBOWS
Proper support of Elbows and Tees is critical. Both must be
protected from thermal expansion and bending forces.
Below are some structural alternatives for stiffening Elbows
using Plate Support or Wall Support Components.
Elbows and Tees are not load-bearing.
Fig 6-10: Centering Band
Fig 6-11: Tee Support Example
Fig 6-12: Horizontal Support Example
21
010.8030.1222 12.22
Flexible
Steel
Wall Support
(Above Tee)
Support Bracket
Connected to
Suitable Bracing
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerStack EPSC and is the answer not in the manual?
Questions and answers