Tees, Elbows, Increasers, Offsets And Manifold, Drains; 45° Lateral Tee; 90° And 87° Tee - ENERVEX PowerStack EPSC Installation & Operating Manual

010.8030.1222 12.22
4. TEES, ELBOWS, INCREASERS, OFFSETS AND
MANIFOLD, DRAINS
4.1 45° LATERAL TEE
Designed to provide connection, a change of direction and
cleaning access if required. Can also be used to enable
header connections to be made.
Fig 4-1: 45° Lateral Tee
4.2 90° AND 87° TEE
The 90° Tee is designed to provide connection, a change of
direction and cleaning access if required. Can also be used
in multiples for header configuration. The 87° Tee is used in
condensing applications to provide a 3° slope to allow for the
back flow of condensation through the system to a suitable
drainage component.
Availble in equal and reducing Tee versions.
Fig 4-2: 90° Tee
4.3 3°, 6°, 15°, 30°, 42° 45°, 87°, 90° ELBOWS
Elbows are used to change directions. Can be used in
singular or in combinations.
Elbows must be protected from thermal expansion and
bending forces. They do not bear load.
Fig 4-3: Samples of Elbows
14