Connection And Adapters; Universal Boiler Kit Adapter; Flange Adapter; Appliance Adapters - ENERVEX PowerStack EPSC Installation & Operating Manual

010.8030.1222 12.22

2. CONNECTION AND ADAPTERS

2.1 UNIVERSAL BOILER ADAPTER
A Universal Boiler Kit Adapter is designed to connect a
chimney to a boiler or other appliance having a flanged outlet
with a 4, 6, 8 or 12 bolt hole pattern. The Boiler Adapter is
a flat 1/8" thick steel ring supplied with 24 equally spaced
holes. To Install:
1. Use the included graphite gasket to seal the face of the
bolt flange to the boiler flange.
2. Align the bolt flange with the appliance's flange and align
the bolt slots with bolt holes in the boiler flange.
3. Tighten all nuts and bolts in an alternating pattern until the
pipe flange is seated firmly between the boiler and the
adapter.
2.2 FLANGE ADAPTER - ANSI 125/150
This component is a short liner length with a standard flange
at one end and an ANSI 125/150 bolt flange attached at
the other end. Can be connected to another ANSI 125/150
bolt flange whether on a generator, engine, boiler or other
appliance.

2.3 APPLIANCE ADAPTERS

ENERVEX supplies adapters for most common appliances.
Fig 2-1: Universal Boiler Kit Adapter
Fig 2-2: Flange Adapter
Fig 2-3: Appliance Adapter
10
Female Connection
Bolt Flange with
Universal Hole
Pattern