English
To determine the battery's state of charge:
► Press the button (1) on the backpack battery.
A single short beep will be emitted. The LEDs on the battery
will glow or flash green for about 5 seconds and indicate the
state of charge (see illustration).
For example:
If six green LEDs glow continuously: full charge.
If one green LED is flashing and four long beeps are emitted:
less than 20 % charge.
14 STIHL AR L Backpack Battery
14.1 Adjusting the Battery Harness to Suit the
Operator's Height
The battery harness can be set to positions S, M or L to suit
the operator's height.
36
100 %
0 %
1
► Depress the locking tab (1) and push it in the direction of
the arrow.
► Remove the slide (2).
2
4
► Line up mark (3) with mark (4).
► Insert the slide (2).
► Pull the slide up (opposite the direction of the arrow).
It will engage with a click.
► Adjust the slide at the left and right shoulder straps to the
same position.
14.2 Positioning the Connecting Cord
WARNING
If using an AR series battery or AP series battery in a battery
bag with connecting cord always use a lift bucket for in-tree
use and maintenance. Do not climb in the tree.
14 STIHL AR L Backpack Battery
2
2
3
0458-007-8601-A
2
2