Engine Oil, Change - Volvo Penta TAD560VE Operator's Manual

Table of Contents

Advertisement

P0008966
47711097 09-2018 © AB VOLVO PENTA

Engine Oil, Change

Always follow the recommended oil change interval
and always change the oil filter in connection with oil
changes. On static engines the drain plug must not be
removed. Use an oil drain pump to pump the oil out.
WARNING!
Hot oil and hot surfaces can cause burns.
1
Run the engine until warm.
2
Remove the drain plug. Drain the oil.
NOTICE! Collect the old oil and old filters and
hand them to a re-cycling station.
3
Install the drain plug with a new gasket.
4
Change the oil filter according to the Oil filter,
Change, page 70 instruction.
5
Fill oil to the correct level.
NOTICE! Do not fill above the MAX level.
6
Start the engine and let it idle. Check that the oil
pressure is normal.
7
Stop the engine. Check that there is no oil
leakage around the filters. Top up with oil as
necessary.
Maintenance
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tad561veTad761veTad762veTad763veTad764veTad765ve

Table of Contents