Summary of Contents for Telit Wireless Solutions EVK2
Page 1
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18...
Page 2
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 APPLICABILITY LIST APPLICABILITY LIST APPLICABILITY LIST APPLICABILITY LIST: : : : Model Model Part Number Part Number Engine Engine Model Model Part Number Part Number Engine Engine EVK2 3990150474 Mother Board GM862 INTERFACE...
Page 4
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 PECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice Notice Notice Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein.
Page 5
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier.
Page 7
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 6.1. 6.1. 6.1. 6.1. Serial P Serial Port Setup Serial P Serial P ort Setup ort Setup ort Setup ......................................................................................27 7.
Page 8
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 14.1. 14.1. 14.1. 14.1. Stand Stand Stand- - - - alone setup Stand alone setup alone setup alone setup ....................................................................................46 14.2.
Page 9
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 17.7.4. GPS to USB ............................. 61 17.8. 17.8. GPIO settings GPIO settings ..............................................62 17.8. 17.8. GPIO settings GPIO settings ..............................................17.8.1.
Page 10
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 22.3. 22.3. 22.3. 22.3. Content of the kit Content of the kit Content of the kit ........ Content of the kit ................................................................................ 79 UC864 family Interface UC864 family Interface ........
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 1. 1. 1. 1. Introduction Introduction Introduction Introduction 1.1. 1.1. 1.1. 1.1. Scope Scope Scope Scope developer’s Evaluation The Aim of this document is the handling description of the EVK2 EVK2 EVK2 EVK2 second edition, a laboratory tool named 1.2.
HE910 Digital Voice Application Note, 80000NT10050a • SIM Holder Design Guides, 80000NT10001a • AT Commands Reference Guide, 80000ST10025a • Telit EVK2 User Guide, 1vv0300704 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 13 of 137...
RED & BLACK CABLE WITH PLUGS GSM-UMTS MAGNETIC ANTENNA CABLE RG174 WITH SMA/M Table 1 Figure 1: GE863-PY Interface Board (upper) fitted on EVK2 Motherboard (lower). Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 14 of 137...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 2. 2. 2. 2. Description Description Description Description CS1139B The motherboard can be split into several functional blocks depending on the implemented function; the following drawings show a block diagram and the displacement of the main blocks on motherboard.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 2.2. 2.2. Mechanical characteristics of the assembled PCBs Mechanical characteristics of the assembled PCBs 2.2. 2.2. Mechanical characteristics of the assembled Mechanical characteristics of the assembled PCBs PCBs 2.2.1. 2.2.1. 2.2.1. 2.2.1. Mother Board...
NOTE: When you use USB port, it is very important to respect the following sequences: Start: first turning ON the EVK2 and then connecting it to the PC Stop: first disconnecting the PC and then turning OFF the EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 21
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 4. 4. 4. 4. Insertion of the Interface Boards Insertion of the Interface Boards Insertion of the Interface Boards Insertion of the Interface Boards Interface Board CS1139B Every must be inserted on paying great attention to match the position of the main connectors;...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 5. 5. 5. 5. Power supply setting Power supply setting Power supply setting Power supply setting EVK2 EVK2 EVK2 EVK2 could be powered by different external sources, only one at time. The requested setting is made inserting the proper jumper connectors in the right position as described in the following paragraphs.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 5.2.1. 5.2.1. 5.2.1. 5.2.1. Coaxial Plug Coaxial Plug Coaxial Plug Coaxial Plug The figure 7 shows the connections of the Power Plug of left part of figure 6. inner contact outer contact powerjck.skd Power Plug Figure 7: Coaxial “...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 5.4. 5.4. Application Notes Application Notes 5.4. 5.4. Application Notes Application Notes 5.4.1. 5.4.1. 5.4.1. 5.4.1. Li Li Li Li- - - - Ion Battery Pack Ion Battery Pack Ion Battery Pack Ion Battery Pack The 3.7V Li-Ion rechargeable Battery Pack should be connected directly to PL107...
Page 26
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 6. 6. 6. 6. Serial interface Serial interface Serial interface Serial interface The following figure shows the architecture of the serial ports. SO301 Upper U303 AT commands PROGRAM on/off 3V LDO U506 +3,7V...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 6.1. 6.1. Serial Port Setup Serial Port Setup 6.1. 6.1. Serial Port Setup Serial Port Setup Communications between your application and the Telit modules are allowed Asynchronous Serial Interfaces connecting the DTE to the...
AF Amplifiers Setting To turn on your well-suited section on EVK2, please refer to “ “paragraph and followings. To know which are the suggested performances of the EVK2 audio transducers, Audio Accessories refer to “...
7.2. Actual Actual definitions have been kept in the Software and on the schematics of Audio1 Audio2 the Telit modules, but with EVK2 we will refer to section instead Handset Handsfree respectively, remembering that: like the two microphone they can have fully equivalent electrical performances (...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 7.3.2. 7.3.2. 7.3.2. 7.3.2. Benefits and disadvantages Benefits and disadvantages Benefits and disadvantages Benefits and disadvantages Differential amplifiers are desirable to use, especially in audio applications where signal levels are very low such as those from microphones.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 7.3.3. 7.3.3. 7.3.3. 7.3.3. Settings Settings Settings Settings SO401 in/out connector, Connecting your accessories to you will implement Single Ended Input/Output configurations. 2 contacts jumpers PL402&PL403 PL403&PL404, Removing all inserted between in/out lines...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 8. 8. 8. 8. AF Amplifiers Setting AF Amplifiers Setting AF Amplifiers Setting AF Amplifiers Setting Base Band Processor Audio Amplifiers selection is made short-circuiting PL403 PL402 RX Amplifier 1 PL403 PL404 RX Amplifier 2 &...
1vv0300704 Rev.11- 2011/07/18 9. 9. 9. 9. Audio outputs Audio outputs Audio outputs Audio outputs SO401 The EVK2 output audio signals could be drive a device connected to LOW AF PL401 ) or to POWER mode HIGH AF POWER mode 9.1.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 9.2. 9.2. 9.2. 9.2. High AF Power Mode High AF Power Mode High AF Power Mode High AF Power Mode 8 8 8 8 ohm Connecting an Speaker to PL401 by a 2 contacts female connector, you could drive it through the 500mW Power Amplifier.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 9.2.1. 9.2.1. 9.2.1. 9.2.1. Speaker and Stand Speaker and Stand Speaker and Stand Speaker and Stand- - - - alone Microphone alone Microphone alone Microphone alone Microphone stand-alone electrete microphone If you are using a Speaker, you can connect a a coaxial 2,5mm plug to SO401, respecting the following pin-out.
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 9.2.2. 9.2.2. 9.2.2. 9.2.2. Speaker plus Headset Speaker plus Headset Speaker plus Headset Speaker plus Headset HIGH AF POWER If you have chosen to connect the Speaker to output, without having a stand-alone electret microphone, it is also possible to connect a standard...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Audio Accessories Audio Accessories Audio Accessories Audio Accessories The following tables show the suggested specification to obtain the best performance off-the-shelf from accessories. 10.1. 10.1. 10.1. 10.1. Headset Headset Headset Headset Nominal sensitivity...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 10.2. 10.2. Stand- - - - alone microphone Stand alone microphone 10.2. 10.2. Stand Stand alone microphone alone microphone Nominal sensitivity -45dBV /1Pa (+/- 3dB) Line coupling Nominal Voltage Range of Using Voltage (1÷10)V...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Indication and services Indication and services Indication and services Indication and services 11.1. 11.1. 11.1. 11.1. Optical Indicators Optical Indicators Optical Indicators Optical Indicators 11.1.1. 11.1.1. 11.1.1. 11.1.1. Status Led Status Led Status Led...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 11.1.2. 11.1.2. 11.1.2. 11.1.2. CHARGE Led CHARGE Led CHARGE Led CHARGE Led A yellow LED is used as Charge In Act Indicator, as explained in the following table. CHARGE LED Meaning Always on...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 11.2. 11.2. Switches Switches 11.2. 11.2. Switches Switches turn On/Off Reset the EVK2 by 2 push buttons. 11.2.1. 11.2.1. 11.2.1. 11.2.1. POWER POWER POWER POWER ON Switch ON Switch ON Switch ON Switch...
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Connectors pinout Connectors pinout Connectors pinout Connectors pinout 12.1. 12.1. 12.1. 12.1. Motherboard to M Motherboard to Module Motherboard to M Motherboard to M odule odule odule The connections between CS1139B and every Telit module Interface Board are...
Page 43
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 DC voltage Power DC voltage Power DC voltage Power DC voltage Power EAR_HF+ AC Out Voltage Audio EAR_MT- AC Out Voltage Audio EAR_HF- AC Out Voltage Audio EAR_MT+ AC Out Voltage Audio DC voltage...
Page 44
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 DC voltage Power DC voltage Power DC voltage Power DC voltage Power SIMIO 3V Only SIM Data I/O SIMCLK Digital Signal SIM Clock SIMRST DC voltage SIM Reset SIMVCC DC voltage SIM Power...
Module Interface Boards 13.1. 13.1. 13.1. 13.1. Generality Generality Generality Generality You can use your EVK2 EVK2 EVK2 EVK2 with see APPLICABILITY LIST APPLICABILITY LIST APPLICABILITY LIST Telit modules fitted on its APPLICABILITY LIST Interface Board; 2x40 contacts all connections are made through connectors.
1vv0300704 Rev.11- 2011/07/18 GM862 Interface GM862 Interface GM862 Interface GM862 Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GM862 can be insert. No settings are needed. Figure 23. GM862 Interface Board 14.1.
Page 47
Telit extension boards, measurements equipment or other tools 2 female connectors (40 pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines). 14.3.
Page 48
1vv0300704 Rev.11- 2011/07/18 GE863 Interface GE863 Interface GE863 Interface GE863 Interface This board allows easily interfacing the GE863 modules with the EVK2 and testing their functionalities; Figure 24. GE863 Interface Boards: GE863-QUAD or GE863-SIM (at left) and GE863-GPS (at right) 15.1. 15.1.
Page 49
2 female connectors (40 pins each one: SO101, SO106) to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 50
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 30 pins each one: PL103, PL104 2 male connectors ( ), on which it is possible to connect external devices like user’s application, Telit extension boards, measurements equipment or other tools 15.4. 15.4.
Page 51
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 15.5. 15.5. USB connector USB connector 15.5. 15.5. USB connector USB connector The USB interface provides 2 serial ports that are related to the NMEA serial port SIRF-Binary serial port of GE863-GPS module.
Page 52
The 2 contacts jumpers have to be fitted between pin1&pin2 pin1&pin2 of PL101-PL102 connectors. Python Debug Port This carries out the on Trace Port of EVK2. PL103 PL104 1151_3a.skd Figure 27: Jumpers setting for GE863-PY/QUAD 15.6.2. 15.6.2. 15.6.2. 15.6.2.
Page 53
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 “SEPARATED SERIAL PORT” “SEPARATED SERIAL PORT” “SEPARATED SERIAL PORT” “SEPARATED SERIAL PORT” SIRF Binary This set the available on the USB connector. PL103 PL104 1151_3c.skd Figure 29: Jumpers setting for SIRF BINARY port available on USB connector...
Page 54
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GE864 Interface GE864 Interface GE864 Interface GE864 Interface This board allows easily interfacing the GE864 modules with the EVK2 and testing their functionalities; No settings are needed. Figure 30. GE864 Interface Board 16.1. 16.1.
Page 55
Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 16.3.
Page 56
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GE864- - - - GPS Interface GE864 GPS Interface GE864 GE864 GPS Interface GPS Interface This board allows testing the functionalities and performance of the GE864-GPS module. Figure 31. GE864-GPS Interface Board 17.1.
Page 57
Stand Stand alone setup alone setup The interface can be used without the EVK2, in this case the following components have to be soldered on the board: the GSM-RESET button the GSM-ON button the STATUS led and its load resistor.
Page 58
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 17.5. 17.5. Power supply Power supply 17.5. 17.5. Power Power supply supply The module (but not the whole interface) receives its power supply from PL105: this jumper must always be plugged in, except when a series measurement instrument is needed.
Page 59
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Figure 33. Jumper on PL104. 17.7. 17.7. 17.7. 17.7. Serial port configuration Serial port configuration Serial port configuration Serial port configuration By means of proper jumper connections on PL201, three different configurations for serial outputs can be selected.
Page 60
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 17.7.1. 17.7.1. 17.7.1. 17.7.1. ASC1 to RS ASC1 to RS ASC1 to RS ASC1 to RS- - - - 232 This configuration connects the ASC1 UART to the Trace serial connector of the EVK2.
Page 61
The NMEA sentences can be redirected to EVK2’s USB port by setting PL201 as explained in the Figure 37, i.e. connecting the NMEA line with the RS-232, and at the same time setting the EVK2 serial line on USB Mode, as shown in Paragraph 7.1 of this document.
Page 62
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 17.8. 17.8. GPIO settings GPIO settings 17.8. 17.8. GPIO settings GPIO settings The interface allows choosing among different options for driving the GPS control signals: Using the GPIOs of the GSM module Using an external host Manually controlling the signals by plugging a jumper.
Page 63
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Figure 39. Settings for PL101 and PL102: internal host, cs1439b cs1439b cs1439b cs1439b and cs1439b cs1439b cs1439b- - - - B B B B cs1439b Note that jumper settings are detailed in the pictures above.
Page 64
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Figure 40. Settings for PL101 and PL102: external host, cs1439b cs1439b cs1439b cs1439b- - - - A A A A . Figure 41. Settings for PL101 and PL102: external host, cs1439b and cs1439b...
Page 65
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 17.9. 17.9. Antenna connectors Antenna connectors 17.9. 17.9. Antenna connectors Antenna connectors 17.9.1. 17.9.1. 17.9.1. 17.9.1. GSM antenna connector GSM antenna connector GSM antenna connector GSM antenna connector A GSM antenna must be connected to SO105.
Page 66
The interface can be used without the EVK2, in this case the following components have to be soldered on the board: the RESET button the ON button the STATUS led and its load resistor.
Page 67
2 female connectors (40 PTH pins each one: SO101 and SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) 1 male connector (5 PTH pins: PL104), which makes available in one place all GPIOs...
Page 68
AGPS UART, thereby putting the board in the so-called controlled mode. No connection with the EVK2 RS-232 Trace is present. Figure 43. Jumpers in controlled mode configuration. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 69
& pin3 pin2 & pin3 pin2 & pin3 of both PL201 and PL206. It allows redirecting the GE865 UART to the EVK2 RS-232 Trace. No connection with the SE867 UART is present. Figure 44. Jumpers in GSM to Trace configuration.
Page 70
GPS to Trace (external host controlling configuration) This configuration is achieved by plugging two female jumper connectors on PL202 and PL207. It allows redirecting the SE867 UART to the EVK2 RS-232 Trace. No connection with the GE865 UART is present.
Page 71
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 71 of 137...
Page 72
1vv0300704 Rev.11- 2011/07/18 GC864 Interface GC864 Interface GC864 Interface GC864 Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GC864 can be inserted. No settings are needed. Figure 31. GC864 Interface Board 19.1.
Page 73
Telit extension boards, measurements equipment or other tools 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines). 19.3.
Page 74
C2 family Interface GC864 GC864 C2 family Interface C2 family Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GC864-C2 can be inserted. No settings are needed. Figure 32. GC864-C2 Interface Board 20.1.
Page 75
Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 20.3.
Page 76
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GE865 Interface GE865 Interface GE865 Interface GE865 Interface This board allows easily interfacing the GE865 modules with the EVK2 and testing their functionalities; No settings are needed. Figure 33. GE864 Interface Board 21.1. 21.1.
Page 77
Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 21.3.
Page 78
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GL865 Interface 865 Interface 865 Interface 865 Interface This board allows easily interfacing the GL865 modules with the EVK2 and testing their functionalities; No settings are needed. Figure 34. GE864 Interface Board 22.1. 22.1.
Page 79
Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 22.3.
Page 80
UC864 family family Interface Interface This board allows easily interfacing the UC864/CC864 modules with the EVK2 and testing their functionalities; No settings are needed. For more information please refer to 1vv0300771 (UC864/CC864 Interface Board User Guide) Figure 35. UC864 Interface Board 23.1.
Page 81
Telit extension boards, measurements equipment or other tools; female connectors (40 PTH pins each one: CON102, CON103), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 2 USB connectors (selectable by Jumper Setting)
Page 82
1vv0300704 Rev.11- 2011/07/18 HE910 family Interface HE910 family Interface HE910 family Interface HE910 family Interface This board allows easily interfacing the HE910 modules with the EVK2 and testing their functionalities; No settings are needed. Figure 36. HE910 Interface Board 24.1.
Page 83
The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the HE910 USB 2.0 port.
Page 84
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 24.3. 24.3. 24.3. 24.3. Antenna connectors Antenna connectors Antenna connectors Antenna connectors 24.3.1. 24.3.1. 24.3.1. 24.3.1. GSM/UMTS Antenna connector GSM/UMTS Antenna connector GSM/UMTS Antenna connector GSM/UMTS Antenna connector A GSM/UMTS compatible antenna (Refer to the product’s HW user guide) antenna must be connected to SO103.
Page 85
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GSM/UMTS Don’t connect a antenna on this connector 24.4. 24.4. Expansion Connectors Expansion Connectors 24.4. 24.4. Expansion Connectors Expansion Connectors 24.4.1. 24.4.1. 24.4.1. 24.4.1. PL301/P PL301/P PL301/P PL301/PL302 L302 L302 L302 The connectors are carrying the following signals:...
Page 86
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 24.4.2. 24.4.2. 24.4.2. 24.4.2. PL303/PL304 PL303/PL304 PL303/PL304 PL303/PL304/PL305 /PL305 /PL305 /PL305 The connectors are carrying the following signals: PL30 PL303 3 3 3 PL30 PL30 Pin# Pin# Pin# Pin# Pin Name Pin Name...
Page 87
ON_OFF & RESET BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and RESET lines of the module. The 2 Buttons on the EVK2 could not be used with the HE910 Interface. 24.5. 24.5.
Page 88
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 88 of 137...
Page 89
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 GPIO ports GPIO ports GPIO ports GPIO ports A certain number of GPIO ports (General Purpose Input/Output) are available on every Telit Module Interface Board, giving you the possibility to drive digital devices and report their own status.
Page 90
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1. 25.1. GPIO location GPIO location 25.1. 25.1. GPIO location GPIO location 25.1.1. 25.1.1. 25.1.1. 25.1.1. GM862 GM862 GM862 GM862 Interface Interface Interface Interface (Refer to schematic diagram 30276SE11150B Figure 34: Position of GPIO ports on GM862 interface Reproduction forbidden without Telit Communications S.p.A.
Page 91
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Note on GM862 Note on GM862 Note on GM862 Note on GM862- - - - GPS version GPS version GPS version GPS version be careful be careful be careful be careful If you use this interface in conjunction with GM862-GPS version...
Page 92
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.2. 25.1.2. 25.1.2. 25.1.2. GE863 GE863 GE863 GE863- - - - GPS Interface GPS Interface GPS Interface GPS Interface (Refer to schematic diagram 30276SE11151A Figure 35: Position of GPIO ports on GE863-GPS interface Reproduction forbidden without Telit Communications S.p.A.
Page 93
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Note on p/n Note on p/n Note on p/n Note on p/n 3990250684 and p/n 3990250685 GE863 3990250684 and p/n 3990250685 GE863 3990250684 and p/n 3990250685 GE863 3990250684 and p/n 3990250685 GE863 30276SE11151A-C...
Page 95
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.4. 25.1.4. 25.1.4. 25.1.4. GE864 Interfac GE864 Interfac GE864 Interfac GE864 Interface (p/n 3990250672) e (p/n 3990250672) e (p/n 3990250672) e (p/n 3990250672) (Refer to schematic diagram 30276SE1152B Figure 37: Position of GPIO ports on GE864 interface Reproduction forbidden without Telit Communications S.p.A.
Page 96
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.5. 25.1.5. 25.1.5. 25.1.5. GE864 GE864 GE864 GE864- - - - GPS Interface (p/n GPS Interface (p/n GPS Interface (p/n GPS Interface (p/n 3990250822 3990250822 3990250822) ) ) ) 3990250822 (Refer to schematic diagram 30373SE11439b) Figure 38: Position of GPIO ports on GE864-GPS interface Reproduction forbidden without Telit Communications S.p.A.
Page 97
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.6. 25.1.6. 25.1.6. 25.1.6. GE865/SE867 GE865/SE867 GE865/SE867 GE865/SE867- - - - AGPS Interface (p/n AGPS Interface (p/n AGPS Interface (p/n AGPS Interface (p/n 3990250814 3990250814 3990250814 3990250814) ) ) ) (Refer to schematic diagram 30311SE11433) Figure 39: Position of GPIO ports on GE865/SE867-AGPS interface Reproduction forbidden without Telit Communications S.p.A.
Page 98
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.7. 25.1.7. 25.1.7. 25.1.7. GC864 Interface GC864 Interface GC864 Interface GC864 Interface (Refer to schematic diagram 30276SE111203B Figure 38. Position of GPIO ports on GC864 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 99
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.8. 25.1.8. 25.1.8. 25.1.8. GC864 GC864 GC864 GC864- - - - C2 Interface (p/n 3990250683) C2 Interface (p/n 3990250683) C2 Interface (p/n 3990250683) C2 Interface (p/n 3990250683) 30276SE11231X (Refer to schematic diagram Figure 39. Position of GPIO ports on GC864-C2 interface Reproduction forbidden without Telit Communications S.p.A.
Page 100
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.9. 25.1.9. 25.1.9. 25.1.9. UC864 Interface UC864 Interface UC864 Interface UC864 Interface Figure 40. Position of GPIO on connectors of UC864 interface PL10 101 1 1 1 PL10 102 2 2 2 TGPIO_05/...
Page 101
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 25.1.10. 25.1.10. 25.1.10. 25.1.10. HE910 Interface HE910 Interface HE910 Interface HE910 Interface Figure 41. Position of GPIO on connectors of HE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 102
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 The connectors are carrying the following signals: Pin Name Pin Name Pin/Connector Pin/Connector Pin Name Pin Name Pin/Connector Pin/Connector GPIO_01 Pin 1 (PL302) GPIO_02 Pin 2 (PL302) GPIO_03 Pin 3 (PL302) GPIO_04 Pin 4 (PL302)
Page 103
SCHEMATICS SCHEMATICS In the following paragraphs the user can find the schematics related to all EVK2 boards, therefore to the Mother Board, to the Interface Boards and to the Extension Boards. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 104
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.1. 26.1. EVK2 Mother Board EVK2 Mother Board 26.1. 26.1. EVK2 Mother Board EVK2 Mother Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 104 of 137...
Page 105
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 105 of 137...
Page 106
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 106 of 137...
Page 107
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 107 of 137...
Page 108
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 108 of 137...
Page 109
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.2. 26.2. GM862 Interface Board GM862 Interface Board 26.2. 26.2. GM862 Interface Board GM862 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 109 of 137...
Page 110
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.3. 26.3. GE863 Interface Board GE863 Interface Board 26.3. 26.3. GE863 Interface Board GE863 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 110 of 137...
Page 111
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 NOTE: NOTE: This sheet is related only to GPS version. NOTE: NOTE: Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 111 of 137...
Page 112
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.4. 26.4. GE864 Interface board GE864 Interface board 26.4. 26.4. GE864 Interface board GE864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 112 of 137...
Page 113
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.5. 26.5. GE864 Interface board - - - - Automotive GE864 Interface board Automotive 26.5. 26.5. GE864 Interface board GE864 Interface board Automotive Automotive Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 114
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.6. 26.6. GE864 Interface board – – – – V2 GE864 Interface board 26.6. 26.6. GE864 Interface board GE864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 115
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.7. 26.7. GE864- - - - GPS Interface board GE864 GPS Interface board 26.7. 26.7. GE864 GE864 GPS Interface board GPS Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 116
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 116 of 137...
Page 117
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.8. 26.8. GE865/SE867- - - - AGPS Interface board GE865/SE867 AGPS Interface board 26.8. 26.8. GE865/SE867 GE865/SE867 AGPS Interface board AGPS Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 118
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 118 of 137...
Page 119
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 119 of 137...
Page 120
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.9. 26.9. GE865 Interface board GE865 Interface board 26.9. 26.9. GE865 Interface board GE865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 120 of 137...
Page 121
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.10. 26.10. GL865 Interface board GL865 Interface board 26.10. 26.10. GL865 Interface board GL865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 121 of 137...
Page 122
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.11. 26.11. GC864 Interface board GC864 Interface board 26.11. 26.11. GC864 Interface board GC864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 122 of 137...
Page 123
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.12. 26.12. GC864- - - - C2 Interface board GC864 C2 Interface board 26.12. 26.12. GC864 GC864 C2 Interface board C2 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved...
Page 124
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.13. 26.13. UC864 Interface board UC864 Inter face board 26.13. 26.13. UC864 Inter UC864 Inter face board face board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 124 of 137...
Page 125
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 125 of 137...
Page 126
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 26.14. 26.14. HE910 Interface board HE910 Interface board 26.14. 26.14. HE910 Interface board HE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 126 of 137...
Page 127
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 127 of 137...
Page 128
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 128 of 137...
Page 129
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Service and firmware update Service and firmware update Service and firmware update Service and firmware update You can update the Telit Module firmware through the serial cables (RS232 or USB 1.1) used for the communication with a PC. The firmware update can be done with a specific software tool provided by Telit that runs on windows based PCs.
Page 130
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 SAFETY RECOMMENDATIONS SAFETY RECOMMENDATIONS SAFETY RECOMMENDATIONS SAFETY RECOMMENDATIONS READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the...
Page 131
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 The European Community provides some Directives for the electronic equipments introduced on the market. All the relevant information’s are available on the European Community website: http://europa.eu.int/comm/enterprise/rtte/dir99-5.htm The text of the Directive 99/05 regarding telecommunication equipments is available, while the applicable Directives (Low Voltage and EMC) are available at: http://europa.eu.int/comm/enterprise/electr_equipment/index_en.htm...
Page 132
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Reference Directives and Laws 2002/95/EC Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
Page 133
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 RoHS Certifications RoHS Certifications RoHS Certifications RoHS Certifications Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 133 of 137...
Page 134
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Disposal of old Electrical & Electronic Equipment Disposal of old Electrical & Electronic Equipment Disposal of old Electrical & Electronic Equipment Disposal of old Electrical & Electronic Equipment (WEEE Mark) (WEEE Mark) (WEEE Mark)
Page 135
Telit EVK2 User Guide 1vv0300704 Rev.11- 2011/07/18 Document History Document History Document History Document History Revision Revision Date Date Changes Changes Revision Revision Date Date Changes Changes Rev 0 05/01/2006 First issue Rev 1 23/01/2006 Added PCB weight and dimensions pag.9 Added default setup pag.8...
Need help?
Do you have a question about the EVK2 and is the answer not in the manual?
Questions and answers