Telit Wireless Solutions LE910C Series WE866C Series User Manual
  1. Manuals
  2. Brands
  3. Telit Wireless Solutions Manuals
  4. Computer Hardware
  5. LE910C Series WE866C Series
  6. User manual

Telit Wireless Solutions LE910C Series WE866C Series User Manual

Lte bundling
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LE910Cx-WE866Cx
LTE Bundling User Guide
1VV0301578 Rev. 11 – 2021-04-27
Telit Technical Documentation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LE910C Series WE866C Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Telit Wireless Solutions LE910C Series WE866C Series

Summary of Contents for Telit Wireless Solutions LE910C Series WE866C Series

  • Page 1 LE910Cx-WE866Cx LTE Bundling User Guide 1VV0301578 Rev. 11 – 2021-04-27 Telit Technical Documentation...

  • Page 2: Applicability Table

    LE910Cx-WE866Cx LTE Bundling User Guide APPLICABILITY TABLE PRODUCTS WE866C3-P WE866C6-P LE910Cx SERIES 1VV0301578 Rev. 11 Page 2 of 67 2021-04-27 Not Subject to NDA...

  • Page 3: Table Of Contents

    LE910Cx-WE866Cx LTE Bundling User Guide CONTENTS APPLICABILITY TABLE CONTENTS INTRODUCTION Scope Audience Contact Information, Support Symbol Conventions Related Documents OVERVIEW FEATURES Specification Overview Data Rate Wi-Fi Interface Hardware Interface HARDWARE Telit Evaluation Board Multi Technology Interface Board WE866Cx M.2 Card SET UP Prerequisites 5.1.1.
  • Page 4 LE910Cx-WE866Cx LTE Bundling User Guide 6.1.1. Wi-Fi HotSpot Mode 6.1.1.1. Accessing Internet through Cellular Hotspot Mode 6.1.1.2. Exchanging Data between MCU and Wi-Fi Station 6.1.2. Wi-Fi STA Mode 6.1.2.1. Exchanging Data with Cloud through Wi-Fi 6.1.3. Wi-Fi Concurrent Mode (Dual AP) Bluetooth Low Energy (BLE) 6.2.1.
  • Page 5 LE910Cx-WE866Cx LTE Bundling User Guide 7.3.3. Others PRODUCT AND SAFETY INFORMATION Copyrights and Other Notices 8.1.1. Copyrights 8.1.2. Computer Software Copyrights Usage and Disclosure Restrictions 8.2.1. License Agreements 8.2.2. Copyrighted Materials 8.2.3. High Risk Materials 8.2.4. Trademarks 8.2.5. Third Party Rights 8.2.6.

  • Page 6: Introduction

    LE910Cx-WE866Cx LTE Bundling User Guide 1. INTRODUCTION Scope This document provides information required to setup and run the Telit LE910Cx + WE866Cx LTE module. Audience This document is intended only for Telit customers who want to set up a bundling application using LE910Cx + WE866Cx LTE module.

  • Page 7: Symbol Conventions

    LE910Cx-WE866Cx LTE Bundling User Guide Symbol Conventions Danger: This information MUST be followed or catastrophic equipment failure or personal injury may occur. Warning: Alerts the user on important steps about the module integration. Note/Tip: Provides advice and suggestions that may be useful when integrating the module.

  • Page 8: Overview

    LE910Cx-WE866Cx LTE Bundling User Guide 2. OVERVIEW Telit’s WE866Cx is a low power, high bandwidth 802.11ac and Bluetooth 4.2 module with a small footprint that provides an easy and cost-effective way to achieve best possible wireless connectivity. The advanced coexistence of LTE, Wi-Fi and Bluetooth dramatically reduces the complexity of cellular back haul design with the LE910Cx 4G LTE module family, making the WE866Cx module ideal for a wide range of IoT...

  • Page 9: Features

    LE910Cx-WE866Cx LTE Bundling User Guide 3. FEATURES Specification Overview • Dual-Band 1x1 Wi-Fi + BT module based on QCA9377-3 • 802.11 a/b/g/n/ac Up to 40Mhz channel BW for 2.4G (802.11n) Up to 80Mhz channel BW for 5G (802.11ac) Max TpT ~215Mbps •...

  • Page 10: Data Rate

    LE910Cx-WE866Cx LTE Bundling User Guide 802.11 PHY Specification Overview Data Range (m) 802.11 Release Frequency Bandwidth Rate MIMO Modulation Protocol Date (GHz) (MHz) (Mbit/s) streams Indoor Outdoor *SGI Jul-19 2.87 (Draft 2.4/5 OFDMA 1.Jan17) 1201 Table 2: 802.11 PHY Specification Overview Data Rate •...

  • Page 11: Hardware Interface

    LE910Cx-WE866Cx LTE Bundling User Guide The tables below describe the Wi-Fi interface for the various cellular modules. Signal Function Type Comment WIFI_SDRST_TGPIO13 WLAN RESET CMOS 1.8V WIFI_SDCMD_TGPIO14 SDIO CMD CMOS 1.8V WIFI_SD0_TGPIO15 SDIO DATA 0 CMOS 1.8V WIFI_SD1_TGPIO16 SDIO DATA 1 CMOS 1.8V WIFI_SD2_TGPIO17 SDIO DATA 2...

  • Page 12: Hardware

    LE910Cx-WE866Cx LTE Bundling User Guide 4. HARDWARE This section describes the hardware components of the LE910Cx +WE866Cx LTE module. Telit Evaluation Board The Telit Evaluation Board is a generic developer’s platform, designed to provide the user with the complete development environment and intended to be used with a new set of Telit IoT modules.
  • Page 13 LE910Cx-WE866Cx LTE Bundling User Guide complete Development Kit of LE910Cx which allows great flexibility for integrating WIFI, BT and GPS technologies with the LE910Cx. The MTB provides the mapping of Telit module signals and functions into the generic EVB signals and functions. The TLB design of the MultiTech Interface Board includes the following items: •...
  • Page 14 LE910Cx-WE866Cx LTE Bundling User Guide Figure 3: MultiTech Interface Board - Top View Figure 4: MultiTech Interface Board - Bottom View 1VV0301578 Rev. 11 Page 14 of 67 2021-04-27 Not Subject to NDA...

  • Page 15: We866Cx M.2 Card

    LE910Cx-WE866Cx LTE Bundling User Guide For detailed description, refer LE910Cx Multi Technology Interface Board TLB – HW User Guide. WE866Cx M.2 Card The M.2 card is designed to interface the Telit LE910Cx module family on an IFBD with the Telit Generic Evaluation Board (EVB) thus forming a complete Development Kit of LE910Cx.
  • Page 16 LE910Cx-WE866Cx LTE Bundling User Guide Figure 6: M.2 Plugged into MTB 1VV0301578 Rev. 11 Page 16 of 67 2021-04-27 Not Subject to NDA...
  • Page 17 LE910Cx-WE866Cx LTE Bundling User Guide The final assembly of the LE910Cx + WE866Cx module is as shown below: Figure 7: Final Assembly 1VV0301578 Rev. 11 Page 17 of 67 2021-04-27 Not Subject to NDA...

  • Page 18: Set Up

    LE910Cx-WE866Cx LTE Bundling User Guide 5. SET UP Prerequisites 5.1.1. Hardware Requirements • Telit Evaluation Board • Multi Technology Interface Board • M.2 Card • USB3.0 Micro-B port cable • One 12V 1.25 Amps Power Adapter • A SIM card with data connectivity. 5.1.2.
  • Page 19 LE910Cx-WE866Cx LTE Bundling User Guide 2) Unzip the “Windows10WHQLDriversInstaller_2.09.0002.zip” file and extract the windows installer package depending on your host system architecture: • x86: Telit WHQL Drivers x86 • x64: Telit WHQL Drivers x64 Figure 9: WHQL Driver Package 3) To start the installation process, double-click and open the windows installer package and run the Installation wizard.
  • Page 20 LE910Cx-WE866Cx LTE Bundling User Guide 5) Select a Setup Type and click Next. Figure 11: Select Setup Type 6) The ready to install Telit WHQLDriversX64 dialog displays. Click Install to continue the installation process. Figure 12: TelitWHQLDriversx64 Begin Installation 1VV0301578 Rev. 11 Page 20 of 67 2021-04-27 Not Subject to NDA...
  • Page 21 LE910Cx-WE866Cx LTE Bundling User Guide 7) The progress window displays the status of the InstallShield wizard. Figure 13: WHQLDriversx64 Installation in Progress 8) When finished, the wizard displays the Completed the TelitWHQLDriversx64 Setup Wizard dialog. Figure 14: WHQLDriversx64 Installation Completed 1VV0301578 Rev.

  • Page 22: Installing Tatc Tool

    LE910Cx-WE866Cx LTE Bundling User Guide 9) Upon successful software installation, following devices will be listed under Device Manager. Figure 15: Installed Devices List in Device Manager Installing TATC Tool https://www.telit.com/evkevb-drivers/ 1) Go to URL: and download the Telit TATC tool package as shown below. Note: The Telit TATC package consist of: •...
  • Page 23 LE910Cx-WE866Cx LTE Bundling User Guide 2) To start the installation process, double-click and open the downloaded Setup_TATC_3.4.11_XFP_4.0.5.msi file and run the TATC Setup Installation wizard. Figure 17: TATC Setup Files 3) The Welcome screen displays. Click Next to continue. Figure 18: Begin TATC Setup Installation 1VV0301578 Rev.
  • Page 24 LE910Cx-WE866Cx LTE Bundling User Guide 4) Accept the End User license agreement. Select the I agree option and click Next to continue. Figure 19: TATC - Accept End User License Agreement 5) Before proceeding further, verify the instructions as shown below. Figure 20: Verifying Installation of a New Release 1VV0301578 Rev.
  • Page 25 LE910Cx-WE866Cx LTE Bundling User Guide 6) Choose the destination folder to install the TATC application file. Figure 21: Select the Destination Folder 7) The Confirm Installation dialog displays. Click Next to start the installation process. Figure 22: Confirm TATC Installation 1VV0301578 Rev.
  • Page 26 LE910Cx-WE866Cx LTE Bundling User Guide 8) The progress window displays the status of the TATC Setup wizard. Figure 23: TATC Installation in Progress 9) When finished, the setup wizard displays the Installation Complete dialog. By default, the Install Xfp checkbox is selected. Click Close to Exit. Once you click Close, the Xfp Setup Wizard displays.
  • Page 27 LE910Cx-WE866Cx LTE Bundling User Guide 10) Accept end user license agreement. Select the I accept the agreement and click Next to continue. Figure 25: Xfp - Accept End User License Agreement 11) Choose the destination folder to install the Xfp application file and click Next. Figure 26: Xfp - Select the Destination Folder 1VV0301578 Rev.
  • Page 28 LE910Cx-WE866Cx LTE Bundling User Guide 12) You have an option of setting up a standard program shortcut or to select the location. Click Next to continue. Figure 27: Xfp - Shortcut to Start Menu Folder 13) The Ready to Install Xfp dialog displays. Click Install to continue the installation process.
  • Page 29 LE910Cx-WE866Cx LTE Bundling User Guide 14) When finished, the wizard displays the Completed the Xfp Setup Wizard dialog. Figure 29: Xfp Installation Completed 15) Upon successful software installation following desktop icons are created on your desktop: 1. Telit AT Controller.Ink 2.

  • Page 30: Start Up

    LE910Cx-WE866Cx LTE Bundling User Guide Start Up 1) Plug the MultiTech Board on the generic EVB and insert the WE866Cx M2 adapter and power it ON. Figure 30: LED Glowing after Successful Connection Connect one end of the USB3.0 Micro-B port in EVK and other end to the USB port of the PC.
  • Page 31 LE910Cx-WE866Cx LTE Bundling User Guide Figure 31: Successful Boot-up 5) Now the board is ready for Connecting AT Controller tool. Use Telit AT Controller to communicate with the WE866Cx module. 1VV0301578 Rev. 11 Page 31 of 67 2021-04-27 Not Subject to NDA...

  • Page 32: Configuring We866Cx Module

    LE910Cx-WE866Cx LTE Bundling User Guide Configuring WE866Cx Module 1) Assuming all settings are set properly, you should be able to communicate with the module. The Telit AT Controller can be used to read or modify the configuration settings. Figure 32: Telit AT Controller Main Menu 2) Click the Settings button to select the COM port (Telit USB modem) assigned to the module.
  • Page 33 LE910Cx-WE866Cx LTE Bundling User Guide 3) After successful configuration of the Telit AT Controller, press the Connect button to connect to the module and receive the device information. Figure 34: Telit AT Controller Device Information 4) Next, start the AT Terminal to communicate with the module using the AT commands.

  • Page 34: Setting Cellular Data Connectivity

    LE910Cx-WE866Cx LTE Bundling User Guide Setting Cellular Data Connectivity 1) Open the Network Settings on your Windows Laptop. 2) Enable the Cellular Settings. Figure 36: Enable Cellular Settings 3) Next, insert the SIM Card into EVB’s Sim Slot. The Windows Laptop shows the Cellular network.
  • Page 35 LE910Cx-WE866Cx LTE Bundling User Guide 4) Uncheck Let Windows Manage This Connection to disconnect the laptop from using the cellular network. This step allows cellular data connection to be used by Telit EVB rather than Windows Laptop. Figure 38: Disconnect Laptop 5) Execute the following Commands to make sure the LTE connectivity is Active for the SIM.
  • Page 36 LE910Cx-WE866Cx LTE Bundling User Guide Figure 39: Execute AT Command for LTE Connectivity Note: If cellular data is not Active for the SIM, the AT+WLANSTART=1 WLAN command returns an Error response. 1VV0301578 Rev. 11 Page 36 of 67 2021-04-27 Not Subject to NDA...

  • Page 37: Wireless Operations

    LE910Cx-WE866Cx LTE Bundling User Guide 6. WIRELESS OPERATIONS This chapter describes the use cases for Wireless operations in the WE866Cx module. Wi-Fi 6.1.1. Wi-Fi HotSpot Mode 6.1.1.1. Accessing Internet through Cellular Hotspot Mode The WE866Cx module operates in AP mode. The internet connectivity for the Wi-Fi module is provided via cellular modem.

  • Page 38: Exchanging Data Between Mcu And Wi-Fi Station

    LE910Cx-WE866Cx LTE Bundling User Guide AT#REBOOT // “Example_APN” should be changed to the cellular provider’s // APN. After changing DUALAPN mode, user must reboot for // changes to take effect. // The above changes are persistent and must be done only // for the first time. Step 2: Configure the WE866Cx module to AP mode using the following command AT#WLANMODE=0 Step 3: Start the WE866Cx module...
  • Page 39 LE910Cx-WE866Cx LTE Bundling User Guide Step 3: Run the WE866Cx Connection Manager using the following AT command AT#CONNMGRSTART=1,0 Step 4: Enable WLAN using the following AT command AT#WLANMODE=0 (Set WLAN mode AP) AT#WLANSTART=1 (Enable WLAN interface and start AP) Step 5: Start TCP server on remote device with IP Address: 192.168.43.105 and Port :8000 Step 6: Start TCP client on LE910Cx WLAN interface using following command, AT#SD=101,0,8000,”192.168.43.105”,0,9000,1,0,0 Note: Connection IDs –...

  • Page 40: Wi-Fi Sta Mode

    LE910Cx-WE866Cx LTE Bundling User Guide 6.1.2. Wi-Fi STA Mode 6.1.2.1. Exchanging Data with Cloud through Wi-Fi Figure 42: Exchanging Data with Cloud through Wi-Fi The following example demonstrates how to exchange data in Wi-Fi Station mode: Step 1: Boot up the board Step 2: Select USB composition as: AT#USBCFG=13 or, AT#USBCFG=14...

  • Page 41: Wi-Fi Concurrent Mode (Dual Ap)

    LE910Cx-WE866Cx LTE Bundling User Guide Step 7: Send data using following command AT#SSEND=101 Enter data when prompted and press Ctrl-Z Step 8: Stop the WE866Cx Connection Manager using the following commands AT#CONNMGRSTART=0 Step 9: Disable the WLAN AT#WLANSTART=0 For more details regarding AT Commands, refer to LE910Cx AT Command Reference. 6.1.3.
  • Page 42 LE910Cx-WE866Cx LTE Bundling User Guide AT#WLANSTART=1 Two AP mode interfaces with different BSSID will be started simultaneously: one AP interface operating in 2.4GHz frequency band and another AP interface operating in 5GHz band. Step 4: Bring up a data connection in the modem side AT#SGACT=2,1 Step 5: Select the AP interface to which further AT commands should be applied •...

  • Page 43: Bluetooth Low Energy (Ble)

    LE910Cx-WE866Cx LTE Bundling User Guide Bluetooth Low Energy (BLE) This section describes the use cases for BLE operations in the WE866Cx module. 6.2.1. Exchanging Data between Host MCU to BLE Devices 6.2.1.1. Exchanging Data between WE866Cx Peripheral Mode and BLE Central Device 6.2.1.1.1.
  • Page 44 LE910Cx-WE866Cx LTE Bundling User Guide Step 1: Boot up the board Step 2: Select USB composition as: AT#USBCFG=13 Step 3: Enable WLAN AT#WLANSTART=1 (Enable WLAN interface) Step 4: Run the WE866Cx Connection Manager on MODEM1 using the following AT command. AT#CONNMGRSTART=1,0 If you are using MODEM2 with USB composition 13, use the following AT command AT#CONNMGRSTART=1,1...

  • Page 45: Exchanging Data Between Le910Cx Central Mode And Ble Peripheral Device

    LE910Cx-WE866Cx LTE Bundling User Guide • To change the value of characteristic (CHARID:53) in the service (SRVID:51) use the following commands AT#BSRVDATAEX=51,53,“61” Where, 61 is the new value of the characteristic (CHARID:53) in the service (SRVID:51) Now, set the BLE device name using the following command Step 8: AT#BNAME=“LE910-BLE”...
  • Page 46 LE910Cx-WE866Cx LTE Bundling User Guide Step 2: Select USB composition as: AT#USBCFG=13 Step 3: Enable WLAN AT#WLANSTART=1 (Enable WLAN interface) Step 4: Run the WE866Cx Connection Manager on MODEM1 using the following AT command AT#CONNMGRSTART=1,0 If you are using MODEM2 with USB composition 13, use the following AT command AT#CONNMGRSTART=1,1 Step 5: Enable Linux network stack AT#ISEL=1...
  • Page 47 LE910Cx-WE866Cx LTE Bundling User Guide #BSRVD:UUID:1800 #BSRVD:UUID:1801 #BSRVD:UUID:180A #BSRVD:UUID:1234 • Discovery characteristics of the primary service “1234” AT#BSRVD=5,“1234”, #BSRVD:UUID:1234 CHARUUID:3456 CHARHNDL:23 CHARPROP:3E CHARUUID:3457 CHARHNDL:26 CHARPROP:08 Step 10: To read on a characteristic, use the following command AT#BREAD=5,23 #BREAD:5,23,"6162" Where, 23 is the characteristic handle Step 11: To write on a characteristic, use the following command AT#BWRITE=5,23,“7172”...

  • Page 48: Gatt Setup

    LE910Cx-WE866Cx LTE Bundling User Guide 6.2.2. GATT Setup 6.2.2.1. Exchanging Data between LE910Cx Peripheral Mode and BLE Central Device using Android nRF Connect Application The following example shows the steps required to setup GATT using an android nRF Connect Application. 6.2.2.1.1.

  • Page 49: Exchanging Data Between Le910Cx Central Mode And Ble Peripheral Device With Gatt Attributes

    LE910Cx-WE866Cx LTE Bundling User Guide AT#BADVE=1 Note: Once the USBCFG value is set on the bundling EVK, the COM port gets disconnected. The user must select the new COM port by searching in device manager. Step 10: Scan for device name “LE910-BLE”, and connect to LE910 peripheral using nRF connect app on your smartphone.
  • Page 50 LE910Cx-WE866Cx LTE Bundling User Guide Step 5: Enable Linux network stack AT#ISEL=1 Step 6: Enable BLE AT#BI=1,1 Note: The EVK boards without an AUX port use the alternate UART port by enabling AUX Port Parameter on the BI Command. Step 7: Next, enable GATT Attributes on BlueMod +S50 Peripheral device using the following command: ATI99 AT+BOAD...

  • Page 51: Ble Web Provisioning

    LE910Cx-WE866Cx LTE Bundling User Guide AT#BSRVD=<CONNECT ID>,, AT#BSRVD=<CONNECT ID>,<UUID> AT#BREAD=CONNECT ID,CHAR HANDLE Step 12: To disconnect the connected device, use the following command AT#BDISCONNECT=4 Where, 4 is the connection ID Step 13: To disable BLE AT#BI=0 Step 14: To disable WLAN AT#WLANSTART=0 6.2.3.

  • Page 52: Http

    LE910Cx-WE866Cx LTE Bundling User Guide Step 8: Start BLE web provisioning using the following command AT#BWNWEBPROV=2 Step 9: Now, open the provisioning app on the phone and scan for devices. Once the “we866cx_445566” device appears in the scan list, connect to device. Step 10: Upon successful connection, the App initiates scan and the LE910 device reports the Wi-Fi scanned networks to the App.

  • Page 53: Https Mode Commands

    LE910Cx-WE866Cx LTE Bundling User Guide Note: <extra_header_line> parameter is not used Step 3: Read data received from the HTTP server AT#HTTPRCV=100,0 <maxByte> can specify the number bytes to be read Step 4: Send data to HTTP server, using POST method AT#HTTPSND=101,0,“/resource_path/”,2048 Note: <post_param>...

  • Page 54: Http/Https Server Authentication

    LE910Cx-WE866Cx LTE Bundling User Guide Once the HTTPS profile is configured, the GET and POST methods can be tested as explained in section 6.3.1 HTTP Mode Commands. 6.3.3. HTTP/HTTPS Server Authentication To enable the basic server authentication, configure the HTTP/HTTPS profile using the below command AT#HTTPCFG=102,“server_addr”,“server_port”,1,“username”,“password”,0,120,1 Once the profile has been successfully...

  • Page 55: Appendix

    LE910Cx-WE866Cx LTE Bundling User Guide 7. APPENDIX WE866Cx Connection Manager WE866Cx Connection Manager is a Linux application running on apps processor enabled for bundling Wi-Fi features. It is supported on USB compositions 13 and 14. • In USB compositions 13, WE866Cx Connection Manager is supported on MODEM1 and MODEM2.
  • Page 56 LE910Cx-WE866Cx LTE Bundling User Guide • When WE866Cx connection manager is started, the SOCAT pipe is broken and the AT commands issued through MODEM ports are intercepted and data is sent through the selected interface. Figure 45: Connection established via WE86CC3 Connection Manager •...

  • Page 57: Enabling We866Cx Connection Manager

    LE910Cx-WE866Cx LTE Bundling User Guide 7.1.1. Enabling WE866Cx Connection Manager Perform the following steps to enable the WE866Cx Connection Manger: 1) Select the USB composition AT#USBCFG=13 or, AT#USBCFG=14 2) Run the connection Manager • To run the connection manager on MODEM1, issue the following commands AT#CONNMGRSTART=1,0 •...

  • Page 58: Features

    LE910Cx-WE866Cx LTE Bundling User Guide AT command Remarks ATS12 ATS30 AT#PKTSZ AT#DSTO AT#BCONNECT If the device that we are trying to connect is not present in Scan list, the BLE stack crashes. AT#BSCAN For filtered scan to show results each time, the advertising interval should be set low on the peripheral device.
  • Page 59 LE910Cx-WE866Cx LTE Bundling User Guide • Socket Last Closure command (AT#SLASTCLOSURE) displays zero when socket is closed. • HTTP methods HEAD, DELETE, PUT are NOT supported • #HTTPSND <data_len> parameter supports maximum data length of 2048 characters • #HTTPRING <content-type> parameter is always "text/html; charset=UTF-8" •...

  • Page 60: Product And Safety Information

    LE910Cx-WE866Cx LTE Bundling User Guide 8. PRODUCT AND SAFETY INFORMATION Copyrights and Other Notices SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Although reasonable efforts have been made to ensure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from the use of the information contained herein.

  • Page 61: Usage And Disclosure Restrictions

    LE910Cx-WE866Cx LTE Bundling User Guide form the copyrighted products. Accordingly, any copyrighted computer programs contained in Telit’s products described in this instruction manual shall not be copied (reverse engineered) or reproduced in any manner without the express written permission of the copyright owner, being Telit or the Third Party software supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or in any other way, any license under the copyrights, patents or patent applications of Telit or other Third Party supplied SW, except for the normal...

  • Page 62: Third Party Rights

    LE910Cx-WE866Cx LTE Bundling User Guide 8.2.5. Third Party Rights The software may include Third Party’s software Rights. In this case the user agrees to comply with all terms and conditions imposed in respect of such separate software rights. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License, shall apply to the Third Party Rights software as well.
  • Page 63 LE910Cx-WE866Cx LTE Bundling User Guide • it can interfere with other electronic devices, particularly in environments such as hospitals, airports, aircrafts, etc. • there is a risk of explosion such as gasoline stations, oil refineries, etc. It is the responsibility of the user to enforce the country regulation and the specific environment regulation.

  • Page 64: Glossary

    LE910Cx-WE866Cx LTE Bundling User Guide 9. GLOSSARY Bluetooth Low Energy Evaluation Board FOTA Firmware Over-the-Air Ground Global Positioning System HTTP HyperText Transfer Protocol HTTPS Hypertext Transfer Protocol Secure IFBD Interface Board JTAG Joint Test Action Group Long-Term Evolution MultiTech Interface Board Pulse-Coded Modulation SDIO Secure Digital Input Output...

  • Page 65: Document History

    LE910Cx-WE866Cx LTE Bundling User Guide DOCUMENT HISTORY Revision Date Changes 2021-04-27 Minor changes on the language Minor changes in the layout Legal Notices updated 2020-07-30 Added section 6.2.2 GATT Setup Added prerequisities under section 6.2.1 Exchanging Data between host MCU to BLE Devices. 2020-05-22 Added Chapter 8 Acronyms Added the following sections:...
  • Page 66 LE910Cx-WE866Cx LTE Bundling User Guide Revision Date Changes Added information related to AT#SSENDUDPEXT command under 2019-05-15 section 7.2 Limitations and Known Issues. Corrected Connection ID for WLAN interface under section 6.1.2 Exchanging Data between MCU and Wi-Fi Station and 6.2.1 Exchanging Data with Cloud through Wi-Fi 2019-05-07 Modified Chapter 6 Wireless Operations to add new enhancement and...

This manual is also suitable for:

We866c3-pWe866c6-p

Table of Contents