Selection List - TechniSat DIGIT ISIO STC Quick Start Manual

5.4.1 Arrow selection method
> If is shown on the left and
using the left / right arrow keys.

5.4.2 Selection list

If is shown on the right next to the set value, the value can be changed using the
selection list.
Press the OK button to open the selection list.
>
Highlight the setting you want using the up / down arrow keys.
>
By pressing the up / down arrow keys it is possible to move the highlight from line
to line, and to move upwards and downwards page by page using the page up /
down buttons.
Confirm by pressing the OK button. The selection list closes again and the selected
>
setting is shown in the menu.
on the right next to the set value, you can alter this
18