Connecting The Dvb Receiver - TechniSat DIGIT ISIO STC Quick Start Manual

4 Connecting the DVB receiver

a Network connection
Connecting the LNB 1 to the LNB input 1 of the DVB receiver. (Please note: The
b
LNB must be connected with the LNB Input 1 when operating using an antenna
signal.)
Connecting the LNB 2 to the LNB input 2 on the DVB receiver.
c
d HDMI connection from the DVB receiver to the TV.
e Connecting the audio outputs to a hi-fi / surround sound system.
f Connecting the DVB receiver to the network / Internet.
Connecting the cable connector (digital) and / or the DVB-T antenna with the RF IN
g
antenna input on the DVB receiver.
The following references (a b c etc.) relate to the illustrations beginning from the previous
page.
10