Options Selection - TechniSat DIGIT ISIO STC Quick Start Manual

Press one of the numeric keypad keys 0 - 9, to select the various letters,
>
numbers, characters and symbols.
After the initial pressing of a numeric keypad key, the first letter of the
corresponding character sequence is highlighted.
> The highlight then moves one field to the right for every additional press of the same
numeric pad key.
Press as many times as necessary to reach the desired character. This will be added
to the entered term after a short delay.
The various numeric pad keys are assigned the following displayed letters, numbers,
characters and symbols.
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Once you have reached the field you want with the highlight, you can then begin
selecting the next character immediately since, in this case, the character is directly
added to the term. If you wish to continue directly selecting a character from the same
numeric pad key, you can add the previously highlighted character to the term by
pressing the right arrow key.

5.5 Options selection

In some menus and operating modes (e.g. TV mode, music / images playback etc.), you
have the option of calling up additional functions and options via the options selection
function.
Pressing the Option button opens the option selection in the lower right-hand corner
>
of the screen.
In this example we can see the option selection for the channel list.
Every additional press of the Option moves the highlight down one line each time.
>
20