Default Nav Page; To Select The Default Nav Page; To Change The Data Fields - Garmin GNS 430 Pilot's Manual & Reference

SECTION 1
INTRODUCTION
5) Press the ENT Key to confirm the identifier. The
'Activate?' function field is highlighted (Figure
1-16).
Figure 1-16 'Activate?' Highlighted
6) Press the ENT Key to activate a direct-to course
to the selected destination.
Once a direct-to destination is selected, press and hold
the CLR Key to display the Default NAV Page.

Default NAV Page

During most flights, the Default NAV Page, the Map
Page, and the NAV/COM Page are the primary pages used
for navigation.

To select the Default NAV Page:

Press and hold the CLR Key (Figure
1-17).
Active Leg of TO/FROM Flag
Flight Plan
Figure 1-17 Default NAV Page
1-12
Course Deviation
Indicator (CDI)
User-selectable
Data Fields
GNS 430(A) Pilot's Guide and Reference
The Default NAV Page (Figure 1-17) displays a graphic
course deviation indicator (CDI), the active leg of the flight
plan (as defined by the current 'from' and 'to' waypoints),
and six user-selectable data fields. The default settings for
these fields are distance to waypoint (DIS), desired track
(DTK), bearing to waypoint (BRG), ground speed (GS),
ground track (TRK), and estimated time enroute (ETE).
See Section 14.3 for definitions of these navigation terms.

To change the data fields:

1) From the Default NAV page, press the MENU
Key and select 'Change Fields?' (Figure 1-18).
Figure 1-18 Default NAV Page Menu
Turn the large right knob to select the data
2)
field to be changed.
3) Turn the small right knob to display a list of
data options (Figure 1-19).
Figure 1-19 'Select Field Type' Window
4) Press the ENT Key to select the desired data
item and return to the Default NAV Page.
190-00140-00 Rev. P