Setup 2 Page; To Select A Menu Option From The Setup 2 Page; To Restore A Setup 1 Option To The Original Factory Settings - Garmin GNS 430 Pilot's Manual & Reference

Restoring Factory Settings
When making changes to any Setup 1 Page option, a
'Restore Defaults?' menu selection allows the pilot to restore
the original factory settings (for the selected option only).
For example, with the Airspace Alarms Page displayed,
the 'Restore Defaults?' option restores all Airspace Alarms
Page settings to the original factory values.
To restore a Setup 1 option to the original
factory settings:
1) Select the desired menu option from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) Press the MENU Key to display the Date/Time
Page Menu (Figure 10-69).
Figure 10-69 Date/Time Page Menu
3) With 'Restore Defaults?' highlighted, press the
ENT Key.
190-00140-00 Rev. P

10.5 SETUP 2 PAGE

The Setup 2 Page (Figure 10-70) provides access (via
menu options) to display adjustments, parameters which
define the nearest airport search, and COM transceiver
channel spacing. When a menu option is selected, the
corresponding page appears providing access to the
various unit settings.
To select a menu option from the Setup 2
Page:
Menu Options (to Select,
Highlight with Cursor and
Current Page Group
1)
GNS 430(A) Pilot's Guide and Reference
Press the ENT Key)
Number of Pages in
Current Page Group
Figure 10-70 Setup 2 Page
Press the small right knob momentarily, to
activate the flashing cursor (Figure 10-70).
SECTION 10
AUX PAGES
Position of
Current Page
within Current
Page Group
10-27