Airport Runway Page; To Display Information For Each Additional Runway - Garmin GNS 430 Pilot's Manual & Reference

7.3 AIRPORT RUNWAy PAGE

The Airport Runway Page (Figure 7-9) displays runway
designations, length, surface type, and lighting for the
selected airport. A map image of the runway layout and
surrounding area is also displayed on the Airport Runway
Page. The map image range appears in the lower left
corner and is adjustable using the RNG Key. For airports
with multiple runways, information for each runway is
available.
Map Image Airport Identifier,
Symbol, and Type
Runway Length and Width, Current Page
Surface, and Lighting
Group
Figure 7-9 Airport Runway Page
190-00140-00 Rev. P
Runway Designations
Position of
Current Page
within Current
Page Group
Number of Pages in
Current Page Group
GNS 430(A) Pilot's Guide and Reference
To display information for each additional
runway:
Press the small right knob to activate the
1)
cursor.
2) Turn the large right knob to place the cursor
on the runway designation field (Figure 7-9).
Turn the small right knob to display a window
3)
listing all runways for the selected airport
(Figure 7-10).
Figure 7-10 Runway Window
4) Continue turning the small right knob to select
the desired runway.
Press the ENT Key to display information for
5)
the selected runway on the Airport Runway
Page (Figure 7-11).
Figure 7-11 Airport Runway Page
6) To remove the flashing cursor, press the small
right knob.
SECTION 7
WPT PAGES
7-5