How To Use; Start Cooking - Candy CTP32SC/E1 Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan. However the
bottom of this pan must have a minimum of diameter according to the corresponding cooking zone. To
obtain the best efficiency of your hob, please place the pan in the centre of the cooking zone.
The base diameter of induction cookware
Cooking
Minimum (mm)
zone
180mm
140
180mm
140

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for a while. After power on, the
buzzer beeps once, all displays show "–" or "– –", indicating
that the induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control ,and the indicator
next to the key will flash
Select a heat setting by touching the Slide control.
• If you don't choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
Maximum (mm)
180
180
11

Advertisement

Table of Contents
loading

Table of Contents