24h Blood Pressure Monitor boso TM-2450
Charging the batteries
Insert the rechargeable batteries into the charger and plug it
into the power socket. If the blue LED lights up, the battery packs are
being charged. The charging process takes roughly 11 hours for a fully
charged battery pack.
On average, a charge of approx. 10 hours suffice following
a 24-h measurement (cf. charger's instruction manual).
Longer storage of the device
If the device is not used for a longer period of time (4 weeks or more), remove
the batteries to prevent possible damage due to leakage.
Before the device is then attached to a patient again, the internal battery must
be charged and the device reprogrammed.
Insert freshly charged batteries.
Please leave the battery packs in the device for two hours.
The internal battery is recharged during this time.
Reprogram the device.
Before attaching the device to a patient, replace the batteries with a set
of freshly charged ones.