Replacing The Batteries - boso TM-2450 Information Sheet

24h Blood Pressure Monitor boso TM-2450

Replacing the batteries

We recommend that after each 24-hour measurement, the used battery set is
changed and replaced using a newly charged battery set.
To prevent any data loss, the data stored on the boso TM-2450 are buffered
using an internal battery. These batteries are automatically charged via the
battery pack. With a fully charged battery pack, the data remain stored for
approx. 10 days.
To fully charge the battery for the first start-up, switch on the device with a fully
charged battery pack for 24 hours.
Step 3
Insert charged batteries
in the battery
compartment
Step 2
Remove empty
batteries
Step 4
Note the polarity
Step 1
Press the battery compartment
lid down firmly and then slide it
.
outwards
Step 5
Close batterie compartment lid