boso TM-2450 Information Sheet page 15

24h Blood Pressure Monitor boso TM-2450
Ending the measurement and transferring the measured data
As soon as the device is removed from the patient after the 24-hour measurement
has been completed, the automatic function must be switched off. To do so, press and
hold the black AUTO-button while the display is activated until the ' ' symbol
disappears in the blood pressure monitor's display (approx. 5 seconds). If the display
is off, activate it by pressing any button.
After that, connect the TM-2450 to a computer with a PC-connection cable.
Transfer the data according to the boso profil-manager XD instruction manual.
After transferring the measured data, it his highly suggested to delete
the data memory.