Related Manuals for Innovative Concepts in Entertainment SUPER CHEXX
Summary of Contents for Innovative Concepts in Entertainment SUPER CHEXX
- Page 1 OWNERS AND SERVICE MANUAL INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 10123 MAIN STREET, CLARENCE, NY 14031 SERVICE: 1-716-759-0360 FAX: 1-716-759-0884 E-MAIL: service@icegame.com WEBSITE: www.icegame.com...
- Page 2 The SUPER CHEXX™ game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the trouble-shooting guide are protected by the new Copyright Act of 1976.
-
Page 3: Table Of Contents
TABLE OF CONTENTS SUPER CHEXX™ Game Play……………………Page 4 Outstanding Features………………………..…..Page 6 & 7 Programming……………………………………..Page 8 Game Assembly……………………………...…..Page 9 Game Operation—Test……….…………..……..Page 9 Maintenance……………………………..………..Page 11 THRU 13 Troubleshooting and Repair………..…………..Page 14 THRU 18 Parts Listing………………………………………...Page 19 Schematics & Wiring Diagrams..………………..Page 20 THRU 26 Warranty Information...…………………………..Page 27 &... -
Page 4: Super Chexx™ Game Play
The National Anthem, as well as the “Boo” sound and the “Ooh’s” and “Aah’s” add to the excitement of playing SUPER CHEXX™. The “Boo” button can be used to eliminate the National Anthem or to “Boo” your opponent. - Page 6 The cover of this game is made of Lexan and will resist breaking or cracking. Unlike previous games using rods that bend or break eas- ily, SUPER CHEXX™ uses rods with a specially devel- OVERHEAD SCOREBOARD oped fiberglass composite and exterior coating to elimi- Scores and shots on goal are automatically tabulated by nate previous problems.
- Page 7 $.25, $.50, $.75 or Free Play. Any combination of time and price can be used. ELECTRONICS ACCESS All of the SUPER CHEXX™ electronics are located on a single PC board just inside the coin door. All IC’s are readily accessible and mounted in high quality sockets simplifying repairs.
-
Page 9: Game Assembly
GAME ASSEMBLY These steps should be followed for initial installation as well as any time the game is dismantled and moved to a new location. 3. Connect 15-Pin Connector and Ribbon Cable connec- INSPECT INSIDE OF BASE tor to main PC Board. The locking edge of the rib- 1. -
Page 11: Maintenance
MAINTENANCE All parts in the SUPER CHEXX™ Hockey Game have SCOREBOARD LIGHTS been manufactured to the highest standards possible. Replacement is advised when necessary. Remove the The following maintenance should be performed as rec- four screws on the light diffuser and pull out the bulb. In- ommended to assure optimal performance and longevity sert the new bulb and reassemble. - Page 12 MAINTENANCE Start the game and observe operation. Check for foreign particles under the ejector arm. The entire bracket assem- bly can be repositioned to correct improper ejection in any direction. Loosen the 2 mounting screws and re-position as necessary. Be sure all parts work freely. Check by pushing the solenoid plunger only, to see that the ejector lifts up about 3/8”...
- Page 13 MAINTENANCE GEARBOXES PUCK CHUTE Gearboxes should be inspected periodically to ensure Clean periodically to ensure a good sliding surface. smooth operation. Gearbox tracks should be kept as Check for cracks. Small cracks can be glued with a C/A clean as possible. If a gearbox seems to rotate stiffly, first adhesive.
-
Page 14: Troubleshooting And Repair
TROUBLESHOOTING AND REPAIR PUCK WILL NOT EJECT PUCK TAKES TWO OR THREE TIMES TO EJECT For some ejection problems the ice surface may have to 1. A puck hitting the ice surface can be corrected by be removed. first making sure the ice surface is in place. If it is in place, observe which way the playfield is posi- 1. - Page 15 TROUBLESHOOTING AND REPAIR PLAYER ROD & GEAR BOX SHAFT MUST MEET IN CENTER OF COLLAR SLOT GEARBOX IS DIFFICULT TO TURN 1. A gearbox-coupling collar may have been forced against a gearbox causing uneven or difficult turning. The usual cause for this is a handle grip coming off a rod and allowing the gearbox to hit either another gearbox or a cabinet end.
- Page 16 TROUBLESHOOTING AND REPAIR cause bounce problems with the micro-switch. Run electronics tests to determine the problem. NO “OH” SOUNDS OR REPEATED “OH” SOUNDS PLAYERS RUB ON THE SIDES OF THEIR SLOTS 1. Short or open circuits in the harness or one of the 1.
- Page 17 TROUBLESHOOTING AND REPAIR TOP CABINET ASSEMBLY WITH ICE SURFACE & PLAYERS INSTALLED PLAYER WITH LONG STICK PLAYER WITH LONG STICK PLAYER NUMBERING AND LAYOUT 18 Long 12 Short 6 Short 4 Short 30 Goalie 14 Short 14 Short 30 Goalie 4 Short 6 Short 12 Short...
- Page 18 TROUBLESHOOTING AND REPAIR TOP CABINET ASSEMBLY WITH ICE SURFACE & PLAYERS REMOVED HINGE SCOREBOARD CABLE “BOO” BUTTON RIGHT CHANNEL GRIP LEFT CHANNEL LONG COLLAR (Not Shown) DEFENSE CHANNEL GRIP CENTER CHANNEL SOLENOID BUMPER ASSEMBLY COLLAR WASHER EJECTOR CHUTE GOALIE KNOB COLLAR RUBBER CENTER CHANNEL DEFENSE CHANNEL...
- Page 19 PARTS LIST DECAL (CABINET) (NEW STYLE) 3025X ICE SURFACE ASSY. 1002X ROD COLLAR (LONG) 3035 PLAYER ROD WASHERS 1003X ROD COLLAR (SHORT) 3036 DOME WASHERS 1004X GOALIE TRACK 4002 GOALIE BUMPER STOPS 1005 GOALIE SWING ARM 4003 CABINET GASKET PER PC. (10 FT.) 1007X PLAYER TRACK 1 &...
- Page 27 Warranty I.C.E warrants all components in the SUPER CHEXX™ game to be free of defects in materials and workmanship for a period of ninety days from the date of pur- chase. This warranty does not cover items damaged due to normal wear and tear, sub- jected to abuse, improperly assembled by the end user, modified, repaired, or oper- ated in a fashion other than that described in the service manual.
- Page 28 ICE Inc. We cannot be responsible for the quality, suitability or safety of any non-ICE part, modification (including labor) that is performed by such a distributor. I.C.E. Parts/Service Dept. Innovative Concepts in Entertainment 10123 Main St. Clarence, NY 14031 Phone #: (716) - 759 – 0360...
Need help?
Do you have a question about the SUPER CHEXX and is the answer not in the manual?
Questions and answers