Selecting Options; Setting The Date And Time - Epson Endeavor L User Manual

Selecting Options

A solid cursor bar highlights the selected parameter. Press
t, '/', +, & to move the cursor to the parameter you want to
change. Then press Page Up or Page Down to display the
available options.
As you move the cursor to each parameter, you see a
description of the available options for that parameter at the
bottom of the screen.
The following sections describe how to choose the correct
SETUP parameters for your system.

Setting the Date and Time

The real-time clock in your computer continuously tracks the
date and time-even when the computer is turned off. Once
you set the date and time using SETUP, you should not need to
change them, unless you need to adjust the time for daylight
savings or other seasonal adjustments. (The computer
automatically changes the date for leap years.)
Use the cursor arrow keys to position the cursor over the
portion of the date or time you want to change. Press Page Up
or Page Down to modify the date or time. The time parameter
uses a 24-hour clock. For example, 5 p.m. is shown as 17.
2 - 4 Running the SETUP Program