Changing Or Deleting A Password; Setting The Keyboard Lock Option - Epson Endeavor L User Manual

Changing or Deleting a Password

If you want to change your password, follow the same steps
as to enter a new password. When the cursor is at the
Enter password option, type the new password you want
to use.
To delete a password, select Not Installed for the
P a s s w o r d s t a t e o p t i o n .
Whenever you change or delete your password using SETUP,
make sure you save the new settings as you exit the SETUP
program.

Setting the Keyboard Lock Option

SETUP provides another level of security for your system in the
keyboard lock function. Once you have set a password for your
system, you can also set a hot key that, when you press it, locks
the keyboard and mouse until you enter your password again.
Follow these steps to define the hot key for your keyboard lock
option :
1. On the password setup screen, move the cursor to the
H o t k e y s t a t e o p t i o n .
Press Page Down until you see New Install. The cursor
2.
m o v e s t o t h e E n t e r ' H o t k e y ' o p t i o n f i e l d .
Enter a letter or a number and press Enter. This identifies
3.
the key you want to press together with Ctrl and Alt as the
hot key to lock your keyboard.
4. As you exit SETUP, make sure you save the new settings.
When you press the hot key you've defined, the keyboard
and mouse lock until you enter your password.
Running the SETUP Program
2 - 1 3