Entering A Password - Epson Endeavor L User Manual

Setting the Pass word Options
SETUP lets you enter a new password or disable an existing
password to control who can access your system. An additional
password option allows you to set a hot key to disable your
keyboard and mouse until you enter your system password.

Entering a Password

Follow these steps to enter a password:
1. Select option 3, Set Password options, from the main
menu.
2. Press Page Down until you see New Install displayed
for the Password state option. The cursor moves to
t h e E n t e r p a s s w o r d o p t i o n f i e l d .
Enter the password you want to use and press Enter. The
3.
password can be up to eight characters and or numbers.
As you type the password, the screen displays an asterisk
for each character you type.
4. The cursor moves to the second Enter password option
field. Type your password again and press Enter. You
again see an asterisk for each character you type.
When you type the same password a second time, you see
the message:
C o r r e c t ! p a s s w o r d i n s t a l l e d
5. As you exit SETUP, make sure you save the new settings.
When the system reboots, you will see the password
prompt.
2-12 Running the SETUP Program