Back Panel Screws; Side Screws Under Plastic Inserts - Epson Apex 110 User's Manual And Diagnostics

The back panel is secured with three screws as shown in Figure 3-1.
2.
Remove the screws and put them to one side. Slip the back panel off the
main unit.
3. The top cover is secured by two screws on each side of the computer as
shown in Figure 3-2. The two screws on the left side of the unit are
covered by small plastic inserts. Gently remove the inserts with a small
screwdriver, then remove the screws on both sides of the computer. Put
the screws and inserts safely to one side.
3-2
Figure 3-1. Back panel screws
Figure 3-2. Side screws under plastic inserts