®
3D TRASAR
5500 - Installation & Operation Manual
Menu
Alarms
Information
Actions
Control
Alarm
Network
Manual
System
Preferences
Settings
Settings
Relay
Info
4.10.10 Slug Feed Biocide Screens
There are three options for slug feeding biocides. Each choice will follow the pre-bleed and lockout
conditions setup in the configuration.
1. Use Hand Feed Nonox to physically add a non-oxidizer by an operator to the cooling system.
Note: If feeding Glutaraldehyde the configured oxidizing feed will be suspended for 8 hours.
2. Use Hand Feed Oxidizer to physically add an oxidizer by an operator to the cooling system.
3. Use Relay Feed Oxidizer to energize the oxidizer relay.
Technical Help
521-OM0108.88
4-28
Copyright © 2009 Nalco Company
(630) 305-CHEM