Manual Relay Control Screens - Nalco 3D TRASAR Series Installation And Operation Manual

Control Alarm
Settings
Settings

4.10.8 Manual Relay Control Screens

All configured control relays can be placed in Manual On, Manual Off, or Auto through these screens.
STEP 1 - After selecting desired relay, highlight Current Mode and press Edit.
STEP 2 - Use arrow keys to select desired mode (Manual Off, Manual On, Auto) and press
Accept.
STEP 3 - After selecting desired mode, highlight Auto After and press Edit (Auto After is
the amount of time the relay will remain in the selected mode before reverting back
to auto).
STEP 4 - Enter the Auto After value in hours and minutes using the keypad (0-4-2-5 equals 4
hours 25 minutes). Entering 00:00 will put the relay in the selected mode continu-
ously.
Technical Help
(630) 305-CHEM
3D TRASAR
Menu
Network
Preferences
STEP 1
STEP 2
521-OM0108.88
Copyright © 2009 Nalco Company
®
5500 - Installation & Operation Manual
Information
System
Info
STEP 3
STEP 4
Actions Alarms
Manual
Relay
4-26