Install Liquid Bio-Reporter Pump - Nalco 3D TRASAR Series Installation And Operation Manual

2.3.2 Install Liquid Bio-reporter Pump

Install the liquid bio-reporter feed pump in a loca-
tion convenient to the bio-reporter tank and the 3D
TRASAR controller.
IMPORTANT: Ensure that the suction side
!
of the bio-reporter pump is always flooded!
For cooling systems with
volumes between 3,000 and
12,000 gallons, use Iwaki pump
(P/N
Technical Help
(630) 305-CHEM
For cooling systems with volumes
less than 3,000 gallons, use
Grundfos pump
141-PJ4035.88).
521-OM0108.88
Copyright © 2009 Nalco Company
®
3D TRASAR 5500 - Installation & Operation Manual
Install bio-reporter feeder
Install Bio-Reporter Feeder in well-lit, dry
location convenient to points of use.
(P/N 6008505).
2-17