Plot Data
Control
Alarm
Settings
Settings
4.4.2 TRASAR (Relay 1) Product Screen
Displays the dosage set point and control range for the
TRASAR product controlled by Relay 1.
4.4.3 Tagged Polymer (Relay 2) Product Screen
Displays the dosage set point and control range for the
Tagged Polymer product controlled by Relay 2.
4.4.4 Oxidizing Biocide Screen
Displays the ORP set point and control range. This is used only if
the system has been configured to control the oxidizing biocide
based on the ORP probe reading.
4.4.5 Blowdown Screen
Displays the conductivity set point and control range.
4.4.6 pH Screen
Displays the pH set point and control range.
NOTE: Control ranges will only be displayed if applicable. Control range is not
displayed if 3D Scale Index schemes are used. In these cases, the ranges are
!
determined by the control algorithm.
Technical Help
(630) 305-CHEM
3D TRASAR
Menu
Network
Preferences
521-OM0108.88
Copyright © 2009 Nalco Company
®
5500 - Installation & Operation Manual
Information
System
Info
Actions
Alarms
Manual
Relay
4-6