Epson PhotoPC 700 User Manual page 71

If you haven't installed your software, do it now, following
the instructions on page 1-10. Make sure the camera is
turned on and connected to your computer.
NOTE
Although these instructions and the accompanying illustrations
show Image Expert running under Windows 95, you can follow
the same steps on a Macintosh, Windows 3.1, or Windows NT
system.
1
Start Image Expert. Under Windows 95 or Windows
NT, click Start , and then point to Programs ,
PhotoPC 700 , Image Expert .
If you're using Windows 95 or Windows NT, you see a
Quick Tour screen like the following:
If you're using a Macintosh or Windows 3.1, skip to
step 3.
2
Click on any of the topics for an animated
demonstration of what you can do with Image Expert
and PhotoPC 700.
Getting Photos Into Your Computer 4-5
4
A
B