Removing A Storage Card; Getting Images From A Card To Your Computer - Epson PhotoPC 700 User Manual

The number of pictures you can store in the storage card
appears in brackets on the camera's display panel.

Removing a Storage Card

Make sure the camera and the LCD screen are turned off.
Then follow these steps:
1
Open the cover and slide the switch on the bottom of
the camera to eject the card, as shown on the right.
2
Remove the card by hand, then close the card slot cover.
CAUTION
Never remove the card while the camera is accessing it. Data in
the card may be lost or damaged. Avoid using or storing the card
in dusty places, in direct sunlight, or in places that become
extremely hot or humid.
switch
Getting Images From a Card to Your
Computer
A PCMCIA adapter allows you to access images stored on
CompactFlash cards directly from your computer or
™
notebook/PowerBook. To use this adapter, your computer
must be equipped with a Type II PCMCIA card slot.
Using CompactFlash Storage Cards 10-3
card slot cover
10
A
B