Producing Your Printout; Printing A Card - Epson PhotoPC 700 User Manual

Producing Your Printout

When you're ready to print your picture, first make sure you
have the correct paper or film loaded in the printer. (See your
printer's User's Guide for paper loading instructions.) Then
follow these steps:
1
Highlight Print at the top of the Print menu and press
the SELECT button. You see a confirmation screen
telling you how many photos are selected.
2
Press the SELECT button to continue printing or press
to return to the Print menu. The LCD screen
BACK
goes blank and the display panel shows a star flashing
across it while the picture is being sent to the printer.
Then the printer starts printing the picture.
NOTE
If you want to stop printing a picture, hold down the
button for about 3 seconds. You see a message on the LCD
screen that the printing is canceled, and then the Print menu
reappears. The printer stops printing and ejects the paper.
3
When you're finished printing your picture(s), press the
BACK button several times to exit the Direct Print
program. Slide the screen switch to OFF and turn off the
printer.

Printing a Card

This layout allows you to print a single image
(3.25 4.25 inches) on an A6-sized card (approximately
4 6 inches). EPSON Photo Quality Ink Jet cards are
perfect for snapshots, photo greeting cards, and many other
uses. You can also use this layout with A6-size glossy film.
These pictures show the way your printouts appear:
BACK
A6
Top
A6
A6
Center
Bottom
Printing Directly From the Camera 11-9
11
A6
A
Full-Size
B