Using The Display Panel; Checking The Battery; Taking Pictures With The Viewfinder - Epson PhotoPC 700 User Manual

NOTE
You can change the battery saving mode to have the camera
remain on after you take a picture with the LCD screen (see
page 8-11). However, you'll use up your batteries faster. You can
also change the auto shut-off time period (see pages 8-6 and 8-8).

Using the Display Panel

The display panel shows the status of your batteries, the
camera's current settings, and the number of pictures
remaining.
.
pictures
remaining
image
quality
low battery
icon
flash
mode
macro
mode
timer

Checking the Battery

When your battery power is almost out, the low
battery icon appears on the display panel. The icon
flashes when your battery power is completely out.
You need to recharge or replace the batteries or use the AC
adapter when you see the low battery icon. Although you
may be able to use the camera with low batteries, it needs full
battery power to operate reliably.
Several factors can affect battery life, including the
surrounding temperature and the type of batteries you use.
Low temperatures—especially below 50 °F (10 °C)—drain
your batteries faster. See page 1-4 for battery use
instructions.

Taking Pictures With the Viewfinder

You can capture an image with PhotoPC 700 as you would
with any point-and-shoot auto-focus camera: look through
the viewfinder and snap the two-step shutter. However, you
can also use the LCD screen to preview your picture. See
page 2-5 for instructions on using the LCD screen.
2
A
B
Taking Pictures 2-3