Erasing A Picture With The Lcd Screen - Epson PhotoPC 700 User Manual

5
Press the shutter button all the way down to turn the
camera and screen back on. Or, close the lens cover and
then open it again.
NOTE
The LCD screen uses up battery power quickly. If it is idle for
more than 30 seconds, the screen turns off automatically. To turn
it back on, press the shutter button all the way down or slide the
OFF
screen switch to and then back to
have the camera remain on after you capture a picture with the
LCD screen, you can change the power mode. See page 8-11 for
instructions.

Erasing a Picture With the LCD Screen

If you change your mind about a picture you have just taken,
you can erase it while the camera is processing it. Follow
these steps:
1
Take a picture using the LCD screen as described above.
The camera beeps and the red light flashes.
2
View
. If you want to
3
While the light is still flashing, press and hold the
Function and BACK buttons.
Function button
You see the following message on the LCD screen:
Press the SELECT button to confirm the deletion.
Processing stops, and the camera and screen shut off.
2
SELECT button
BACK button
A
B
Taking Pictures 2-7