Epson PhotoPC 700 User Manual page 120

Select another port if you want to change your
connection. In most cases, it is best to leave the Port
setting at Auto because EPSON Photo!2 can detect the
camera connection automatically.
Select a different communication speed. EPSON
Photo!2 automatically chooses the fastest speed that
works with your system. This may actually be too fast
for the configuration of your port. You may need to
experiment to choose the best speed.
Click Test Connection to make sure your new settings
work with your system.
Click the Set Time button to change the camera's time
and date settings.
You see a dialog box like the following:
8-8 Using Custom and Advanced Features
Enter new values for the settings, or click Copy from
Computer to have your camera automatically
synchronized to your computer. Click OK to return to
the Setup dialog box.
Enter a new Auto Shut-off Time if you want to
change this setting (not available on Macintosh). This is
the idle period after which the camera turns off
automatically when it is not connected to your
computer. (If you set a power-down time in
Image Expert, it overrides the auto shut-off time setting
in EPSON Photo!2.)
Enter a new Camera ID if you want to change the
default. This might be useful if you have more than one
camera and you want to be able to have its ID recorded
in your picture data.