Epson PhotoPC 700 User Manual page 168

A white or light-colored band appears on the screen image.
This happens when you're facing a brightly lit subject,
and it won't affect your picture quality.
Nothing appears on the television when you connect your
camera to it.
Make sure the video cable is connected correctly, as
described in Chapter 2, and the camera and TV are
turned on.
Make sure your LCD screen is set to Playback .
Make sure the TV is set to video mode. See the manual
for your television if you need help.
Check your batteries and make sure they are installed
correctly. Recharge or replace the batteries if necessary.
12-4 Maintenance and Troubleshooting
The "pictures remaining" number on the display panel
doesn't decrease after you take a picture.
Your camera is operating correctly. The total number of
pictures you can store depends on your pictures'
content. So the number doesn't always change,
especially when you're using standard image quality.
You get an error message when you try to transfer your
pictures to the computer.
Make sure the cable is connected correctly as described
in Chapter 4.
Make sure your camera is turned on and the batteries
have enough power.
Check the serial port settings in your Image Expert or
EPSON Photo!2 software. You may need to change the
Port and Speed serial connection settings to Auto.
If you're using a Windows system and have trouble
connecting to the COM port, check the computer's
COM port settings. Make sure the port is properly