Follow these steps to take a picture with the timer:
1
Secure the camera on a flat surface or on a tripod. (See
page A-3 for information on attaching the camera to a
tripod.)
2
Turn on the camera and wait until the status light turns
green.
3
Press the timer button. The timer icon
the display panel.
4
Press the shutter button. The timer icon and the red
timer light on the front of the camera flash slowly for
8 seconds. Then they flash rapidly for 2 seconds before
the shutter is released.
The camera beeps when the image is captured. The
status light on the back of the camera flashes red as
PhotoPC 700 processes the image. When the status light
stops flashing and turns green, you can take another
picture.
5
To turn off the timer, press the timer button again or
turn off the camera.
appears on
Using the View Mode Menus
You can use the view mode on the LCD screen to take digital
panorama/zoom pictures, use advanced settings, and control
the display of information on the screen.
TIP
You can use macro mode in combination with the panorama and
zoom formats and with advanced settings.
timer
2
A
B
Taking Pictures 2-13