Texas Instruments DLP Discovery 4100 User Manual page 7

www.ti.com
– On-board regulation of other power supplies included.
• Applications FPGA (APPSFPGA)
– Xilinx Virtex 5 (XC5VLX50) FPGA for user application pattern generation and development opportunities.
• APPSFPGA Configuration PROM (XCF16P)
– Stores and provides configuration data for the APPSFPGA. User programmable for future development.
• A 64-bit DDR2 SODIMM connector
– For end user development of image storage.
• A Cypress CY7C68013A USB controller
– Provides USB data and control interface (USB speeds can limit pattern rates).
– Enabled end user development of USB interface.
• EXP Expansion Connectors
– Connect to external EXP interface compatible customer boards.
– Includes additional 2xLVDS pairs to support 64 bit 2xLVDS connection through EXP connectors.
• Flash Memory (connected to APPSFPGA)
– Non-volatile storage for end user development.
• Various I/O connectors
– Mictor test connectors for logic analyzer connection.
– JTAG headers for device programming.
– GPIO connectors for general purpose digital I/O.
DLPU040B – OCTOBER 2016 – REVISED MARCH 2023
Submit Document Feedback
Copyright © 2023 Texas Instruments Incorporated
®
DLP Discovery™ 4100 Development Platform
Overview
7