www.ti.com
4.3.1.4 Execution Menu
The Execution menu contains script commands and configuration options:
•
Run – Executes all the commands in the list without interruption, repeating script until Stop selected.
•
Run Once – Executes all the commands in the list without interruption for one cycle.
•
Loop Break – Exit a "Loop Until Break" script command.
•
Step – Sets the execution of commands to one step at a time mode.
•
Next Step – Executes the next script command.
•
Stop – End execution.
•
Set Start – Sets the start point of command execution within the script.
•
Set End – Sets the end point of command execution within the script.
DLPU040B – OCTOBER 2016 – REVISED MARCH 2023
Submit Document Feedback
Figure 4-17. Execution Menu
Copyright © 2023 Texas Instruments Incorporated
®
DLP
Discovery™ 4100 Development Platform
Software
41