Respekta KM 9130 T-28 Installation & User's Instructions page 72

4 - Press the timer control again, then "0" will flash
on the display.
5 - Set the time by pressing the "+" button, (e.g. 2),
now the timer is set to 25 minutes.
6 - When the time is set, the countdown begins
immediately. The
remaining time.
NOTE: The red dot next to the power level
indicator lights up to indicate the hotplates
selected. The dot of the corresponding
plate flashes.
display will show the
Fig. 4.24
Fig. 4.25
Fig. 4.26
Fig. 4.27
en-29