Respekta KM 9130 T-28 Installation & User's Instructions page 69

4.2.7 Using the timer
You can use the timer in two different ways:
- It can be used as a minute timer. In this case, the timer will not switch off any cooking zone after the
set time has elapsed.
- It can be used as an off timer to switch off one or more cooking zones when the time runs out.
NOTE: You can set the timer for up to 99 minutes.
You can use the timer even if you do not select a hotplate.
Set the timer to keep time:
1 - Make sure that the hob is switched on and that the hotplate selection button is not activated
(the hotplate indication '-' does not flash).
NOTE: You can set the timer before
or after you finish setting the hotplate
intensity.
2 - Press the timer button, "00" will appear on the
timer display and "0" will flash.
en-26
Fig. 4.15
Fig. 4.16