4. Select one of the menu options listed on the left, then change any
of the settings as needed. These settings correspond to those
found in the projector's menu system.
You cannot change the following settings using a web browser:
in the Settings menu
■
Pointer
,
■
User's Logo
Extended menu
and
■
Reset All
Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons. Choose a source, stop the
action, turn off the picture and sound, or turn the projector's power
on or off.
Transferring Files by SMB
If your projector is connected to a network as described on page 154,
you can send files over the network to a CompactFlash card inserted
in the projector (see page 53). Then you can use the projector's PC
Free feature to present images and movies.
On a Windows PC, you can use SMB (Server Message Block) to send
files to the projector, as described below. On a Macintosh, you can
connect to the projector using the Finder.
In Windows, follow these steps:
1. Open Windows Explorer.
2. Enter the IP address of the projector in the
example, 192.168.100.100).
, and
High Altitude Mode
in the Reset menu
Reset Lamp Hours
in the
Language
field (for
Address
note
To send files to a projector
when it's in standby mode
(plugged in but not turned
on), you must select
as the
Network On
setting in
Standby Mode
the projector's Extended
menu (see page 150).
Managing Projectors
169