Solving Network Problems - Epson PowerLite 1825 User Manual

Solving Network Problems

You don't see your projector in the EMP Monitor window.
■ Make sure that you've connected the projector to the network and
configured it correctly; see page 61. Also, make sure you've
registered the projector with EMP Monitor; see page 157.
Make sure that Standby Mode in the projector's Extended menu
■
is set to
Network On
If the computer you are using is running Windows XP, Vista, or
■
2000, you must be logged in as the Administrator.
Try restarting your computer.
■
You can't connect to the projector using NS Connection.
■ Make sure the wireless network module is installed correctly in
the projector; see page 54. If you have to reinstall the module,
restart NS Connection or the program will not be able to detect
the projector.
Make sure you are using Version 2.30 of EMP NS Connection. If
■
you are using an older version, you must uninstall it and install
version 2.30 on the EasyMP CD-ROM that came with your
projector. See page 199 for instructions.
Restart your computer.
■
Make sure your projector and computer are configured correctly;
■
see page 61 (Ad Hoc mode) or page 68 (Access Point mode).
Make sure that you have sufficient wireless signal strength (above
■
50 percent). On a Mac, check the AirPort icon on the Mac menu
bar. In Windows, see the documentation for your computer's
wireless card or adapter for details.
Make sure you aren't projecting one of the EasyMP configuration
■
screens. (You should see a message that the projector is ready to
connect.) If you have to exit a configuration screen, restart
NS Connection.
.
Solving Problems
191