Customizing Power And Operation - Epson PowerLite 1825 User Manual

Customizing Power and Operation

You can use the Extended menu to customize the way the projector
displays images, enable quick startup, turn sleep mode on or off, and
customize other projector operations.
■ Display
Use this setting to turn off the display of messages, change the
background color, enable logo display, or turn off the startup
screen display.
■ User's Logo
Create a custom startup screen, as described on page 146.
■ Projection
Select (to project from the front of a screen and right side
Front
up),
Front/Ceiling
from the ceiling),
Rear
transparent screen), or
a transparent screen when the projector is mounted upside-down
from the ceiling).
■ Operation
Enable
Direct Power On
when the power cable is connected (without pressing the
button). Enable
Sleep Mode
turn off automatically if it is idle (and no signal is received) for 30
minutes or when the A/V mute slide (lens cover) is closed. Enable
High Altitude Mode
4900 ft (1500 meters).
(when the projector is mounted upside-down
(to project from behind onto a
(to project from behind onto
Rear/Ceiling
if you want to have the projector start
if you want to have the projector
when you are using the projector above
note
If Direct Power On is
enabled, the power cable is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
Do not use the projector at
altitudes above 7500 feet
Power
(2,286 meters).
Fine-Tuning the Projector
149