note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve power. When you
release the button, normal
operation resumes.
Presenting With the Remote Control
30
Using the Remote Control
Make sure batteries are installed as described on page 179. Follow
these tips for using the remote control:
Point the remote control at the front of the projector or at the
■
screen.
Stand within 20 feet (6 meters) of the projector.
■
Avoid using the remote under bright fluorescent lamps or in
■
direct sunlight, or the projector may not respond properly.
Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
■
The easiest way to select your source is to press the
on the remote control (or the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, there are several
■
Use them to switch between equipment connected to the port
identified on each button.
Search
button on the
Source Search
buttons.
Source
button