Appendix 2 Procedure For Replacing The A1Sd51S With The Qd51(-R24) - Mitsubishi MELSEC Q Series Handbook

Appendix 2 Procedure for Replacing the A1SD51S with the QD51(-R24)

The following is the procedure for replacing the A1SD51S with the QD51(-R24).
Connect a console and an external device to the QD51(-R24).
Connect GX Developer to the CPU module.
In GX Developer, configure the intelligent function module switch
settings for the QD51(-R24).
Set Switch 2 to 0004
Modify the BASIC program that has been used for the A1SD51S.
Modify the sequence program.
Debug the programs.
In the QD51(-R24) intelligent function module switch setting
dialog box of GX Developer, change the Switch 2 value to any
of 0000 to 0003
H H
START
(Programming mode).
H
(Run mode or Multitask debug mode).
END
Refer to Appendix 2 (1)
Refer to Appendix 2 (2)
Refer to Section 4.6.2
Refer to Appendix 2 (4)
Refer to Appendix 2 (2)
App
- 2