Using Micro-adjustment
1. Make sure that the printer is turned on and that either a single
sheet or continuous paper is ready to be loaded.
2. A single sheet loads automatically. For continuous paper, press
the LOAD/EJECT button to feed paper to the loading position.
Then press the ON LINE button; the MULTI-PART light begins to
blink.
Note: You can use the FORM FEED and LINE FEED buttons for micro-
adjustment only while the MULTI-PART light is blinking.
Press the FORM FEED button to feed the paper forward or the
3.
LINE FEED button to feed the paper backward.
Using the Printer
3-22