Epson LQ-1050X User Manual page 296

ESC p
Format:
A S C I I c o d e : E S C
Decimal:
Hexadecimal:
Comments:
Turns proportional mode on and off.
The following values can be used for n:
1: Turns mode on.
0: Turns mode off.
The width of proportional characters varies from character to
character. Therefore, a narrow letter like i receives less space than
a wide letter like W. Proportional character widths are given in
the Appendix. This command overrides the condensed mode and
fixed cpi fonts. When proportional is cancelled, the previously
selected font is used. Graphic characters are printed in fixed cpi
only; proportional mode is only available in Roman and Sans
Serif fonts.
SI
Format:
ASCII code:
Decimal:
Hexadecimal: OF
Comments:
Prints characters at about 60 percent of their normal width. For
example, the condensed 10 cpi mode has 17 characters per inch.
Proportional characters override the condensed mode.
Condensed mode cannot be combined with 15 cpi. Condensed
can also be turned on and off by SelecType or the ESC SI
command.
Turn Proportional Mode On/Off
27 112
1B 70
SI
15
n
n
n
Select Condensed Mode
Command Summary
9-25